Download HE500TSW232 Manual

CH. 11: SMARTSTACK
11.3
30 June 2004
PAGE 135
MAN0023-13
Configuring SmartStack Module
Click on the SmartStack Configuration icon or choose SmartStack I/O from the Configuration menu.
The following configuration dialog box is displayed: -
Figure 11.1 – SmartStack Configuration
To configure a specific smartstack module click the config button to the right of the required module or
right click on the module itself.
NOTE: - After the project is downloaded to the TIU20X, on power up the TIU checks if the specified
SmartStack module is inserted. If the module is not inserted the TIU will display “SmartStack I/O Error”.
Power down TIU and insert specified SmartStack module.