Download User`s Manual - Performance Audio

Transcript
Synthesizer One
User’s Manual
System Page
Global functionality such as velocity scaling, output anti-aliasing filters, bender control, and MIDI performance controller
mapping are edited from the System page. Keyboard modes such as voice detuning, glide, note stealing and unison
modes are savable per preset. A global clock rate can be set, or an external clock source such as MIDI beat clock can be
used to sync LFO and the Performance Generator rates. The effects section is capable of flange, chorus, echo, and beat
synced delay. A stereo EQ section straight from FilterBank provides additional beef to sounds.
Velocity Curves
The three velocity curves are assignable to any velocity based modulation including preset volume (VCA), OSC FM, and
VCF cutoff and Q modulation.
CURVE 1, 2, 3 - controls the velocity curve linearity. Curve 1 is displayed in white, Curve 2 in purple, and Curve
3 in yellow. The curve settings are saved per preset.
Pitch Bender
The pitch bender up and down range is adjustable in half step increments, +/- 12 help steps (1 octave). The bender
range linearity is also controllable. The pitch bender settings are saved per preset.
UP, DOWN - controls the up and down range of the pitch bender response.
CURVE - controls the linearity of the pitch bend range.
MIDI Performance Controllers
Synthesizer One can assign up to 4 MIDI controllers to a synthesizer parameter. These assignments are called MIDI
Performance Controllers, and are saved per preset. Unlike MIDI Controller Mappings, the Performance Controller
does not override the control value - instead the MIDI control value is added to the original control value. Each
MIDI Performance Controller can be assigned up to 2 Synthesizer One parameters. The MIDI Performance Controller
assignments are saved per preset.
Page 28
mcdsp.com