1
Download ION Reference Guide
Transcript
ION Reference IEC 61850 GGIO Onb Module Output Registers These registers are formatted and named according to IEC 61850 protocol standards. SPCS01.stVal ... SPCS07.stVal These registers are the status of onboard digital outputs, either taken from the Digital Output Status input register or from IEC 61850, depending in the corresponding Control Mode setup register value. Refer to “Detailed Module Operation” for more information. Ind1.stVal ... Ind8.stVal These registers are the status of the onboard digital inputs, taken from the Digital Input 1-8 registers. Event Events produced by the module are recorded in the Event register. Possible events and their associated priority numbers are shown in the following table. Event Priority Group Priority Description Reset 5 A module reset has occurred. Setup Change 10 Input links, setup registers or labels have changed. Information 25 NOT AVAILABLE AVAILABLE. input caused output to go NOT The Event output register stores the following information for each ION event: time stamp, priority, cause, effect, and any values or conditions associated with the cause and effect. © 2010 Schneider Electric. All rights reserved. Page 277
