Transcript
Bluetooth Controller Paring Directions: 3D VR GLASSES USER MANUAL Insert 2 AAA batteries (not included) into the controller The controller must be in Pairing Mode, press and hold the power button for 12 seconds, LED light will flash rapidly SELECT Go to your Bluetooth Settings and press Scan for Bluetooth Devices VRG-RMC will appear, select and press Pair T AR ST Once pairing is complete the Bluetooth controller is now synced with your phone *If pairing to another device un-pair this from the original device Button Layout Dual Function Remote Key/Game Switch Functions Key Mode D PAD KEY / GAME SWITCH Mouse functionality for Android phones The joystick acts as a mouse, the Start key is the left click and the Select key is the right click on a mouse. R1 R2 SELECT POWER ON/OFF L1 SELECT T AR ST L2 INDICATOR LIGHT Button Functionality for Music and Videos (Android & iOS) L1 is for playing music, X is for volume Up, B is volume down, L1 is play/pause, R2 is next track, R1 is previous track or begin track. ATTN: There is a small portion of smart phones that cannot use the VR controller for full functionality. Camera Control iOS: Click X to take photo Android: Use the cursor to take photo START Game Mode for Android The joystick and buttons A, B, X, Y, L1, L2, R1, R2, Start and Select correspond according to the game. Insert Phone 4.7” - 6” 4.7” LCD screen must be centered 4 5 6 6” 7 Suitable with Smartphone size 4.7” - 6” Opening for ventillation and access to audio jack for headphones NFC Sticker Tag NFC Included as a bonus you will find an NFC Sticker Tag. This is strictly for NFC enabled Android phones. The NFC tag sends a beacon to your phone when in close proximity *, and using the free app from the Google Play store named “NFC Task Launcher”, you can assign actions to perform once the connection has been made such as “Launch Google Cardboard”. This makes it simpler for the phone to recognize it has been placed in the VR Glasses by attaching the sticker to the inside of the device behind where the phone is to be placed and also makes the application launch hands free. * Approximately a few centimeters from the phones NFC chip, locations may vary, please consult your phones user manual if needed, NFC and Bluetooth must be turned ON for this feature to work iPhone 5 plastic insert 2D Streaming movies 2D to 3D Presentations 3D Side by side 360 + 3D Action cam 360 + 3D Professional 360 + 3D Interactive gaming
