Download DKE Manual

Transcript
2.2.10 Rician noise subtraction
fn_noise
User-supplied map of Rician noise level (default: '' (i.e., none)). Noise subtraction is based on
the method of McGibney and Smith (1993). Estimated signal s_hat at each voxel is obtained as
s_hat = (s^2 - n^2) ^0.5, where s is the measured signal and n is the noise level at that voxel.
fwhm_noise
FWHM (in mm) of Gaussian kernel for smoothing noise image. A zero value indicates no
smoothing (default: 0).
2.2.11 Parametric map filtering
median_filter_method
Selective median filtering applied to voxels that violate the minimum directional kurtosis
constraints (default: 2): (0) no filtering; (1) weak filtering (voxels with less than 15 unviolated
constraints will be filtered); (2) strong filtering (voxels with any constraint violation will be
filtered).
2.2.12 Parametric map interpolation
map_interpolation_method.flag
Whether (1) or not (0) to interpolate the parametric maps (default: 1).
map_interpolation_method.order
Interpolation polynomial order: (0) nearest neighbor; (1) trilinear; (2 and up) higher order
(default: 1).
map_interpolation_method.resolution
Target resolution (isotropic) in mm for the interpolated maps (default: 1 mm).