Download School Setup - the Studio Organizer

Bar Code Scanner Setup
The Studio Organizer is bar code scanner compatible. Using a bar code scanner to record attendance is a tremendous time
saver and well worth the investment.
When using a bar code scanner, always plug your bar code scanner directly into a USB port on your computer or a powered
USB hub. Bar code scanners draw power from their USB connection, so do not plug a bar code scanner into a USB port on a
keyboard or an unpowered USB hub. Once your scanner is connected, allow your computer to recognize the scanner. A
wizard may appear guiding you through this process.
If you are using a Unitech MS210 bar code scanner on a Windows computer, no additional programming is required.
If you are using a Unitech MS210 bar code scanner with a Macintosh computer, it may be necessary to program your
scanner. Scan the Factory Defaults bar code on Page A-2 in the back of the MS210 manual, then scan the USB bar code,
which is the fourth one down on page A-1.
If you are using a Unitech MS146 card reader, no programming is required.
If you have a Honeywell 3800 it must be programmed to work with the Studio Organizer. The programming instructions can
be found in the Bar Coding folder inside the Studio Organizer folder on your hard drive. This special programming only
needs to be done once.
Instructions for all of the above bar code scanners are inside the Bar Coding folder, inside the Studio Organizer folder on
your hard drive and are also available on the Purchase page of the Studio Organizer web site.
Using Your Existing Scanner
If you already own a bar code scanner you'll more than likely be able to continue to use it with the Studio Organizer. For
instructions please read Programming Your Existing Scanner in the built in Help.
Creating Your Own Bar Code Designs
Please read Creating Your Own Bar Coded Items in the built in Help.
the Studio Organizer 5v21
School Setup p. 21