Download APc User Manual
Transcript
Radios In the “Radios” tab, the radios are listed in a table and the following parameters are shown: Model(Chipsets), Channel, Bit Rate, ACK Timeout, and ACK Timeout Value. SSIDs In the SSIDs tab, the list of wireless networks (SSIDs) are displayed in a table with the following parameters: SSID, Profile, Channel, Encryption, and TX Rate/RX Rate. Neighbors In the “Neighbors” tab, a table shows the details: Status, Name, MAC Address, IP Address, and Signal. This would be relevant to the Compex MeshWRT. Stations In the Stations tab, the connected end users and CompexWRT stations are listed in a table. The parameters shown are: Host, IP Address, MAC Address, Network, Signal, Signal/Chains, TX Rate, RX Rate, and TX-CCQ. The list of stations is updated every 1 minute. Users In the Users tab, the list of end users (e.g. mobile phone, laptop) is displayed in table with the following parameters: Host, IP Address, MAC Address, Brand, Network, Signal, Signal/Chains, TX The [Management] Page 41