Download APc User Manual

Transcript
Radios
In the “Radios” tab, the radios are listed in a table and the following parameters are shown:
Model(Chipsets), Channel, Bit Rate, ACK Timeout, and ACK Timeout Value.
SSIDs
In the SSIDs tab, the list of wireless networks (SSIDs) are displayed in a table with the following
parameters: SSID, Profile, Channel, Encryption, and TX Rate/RX Rate.
Neighbors
In the “Neighbors” tab, a table shows the details: Status, Name, MAC Address, IP Address, and
Signal. This would be relevant to the Compex MeshWRT.
Stations
In the Stations tab, the connected end users and CompexWRT stations are listed in a table. The
parameters shown are: Host, IP Address, MAC Address, Network, Signal, Signal/Chains, TX Rate, RX
Rate, and TX-CCQ. The list of stations is updated every 1 minute.
Users
In the Users tab, the list of end users (e.g. mobile phone, laptop) is displayed in table with the
following parameters: Host, IP Address, MAC Address, Brand, Network, Signal, Signal/Chains, TX
The [Management] Page
41