Download PowerPlex® ES System

tmd017.0708.qxp
7/25/2008
4:12 PM
Page 25
Processing Sample Data for Databasing or Paternity Samples
Import sample files into a new project as described in the Applied
Biosystems GeneMapper ® ID Software Human Identification Analysis Tutorial.
2.
In the Sample Type column, use the drop-down menu to select “Ladder”,
“Sample”, “Positive Control” or “Negative Control”. Every folder in the
project must contain at least one ladder that is designated as such for
proper genotyping.
3.
In the Analysis Method column, select the analysis method created in the
Creating a Databasing or Paternity Analysis Method section.
4.
In the Panel column, select “PowerPlex_ES_ID3.2.X”, where “X” refers to
the most recent version of the panel files. This is the panel set that was
imported in Section 6.A.
5.
In the Size Standard column, select the size standard that was created in
Creating a Size Standard section.
6.
If analyzing data from an ABI PRISM® 310 Genetic Analyzer, ensure that
the appropriate matrix file is selected in the Matrix column.
7.
Select “Analyze” (green arrow button) to start the data analysis.
5785TB
1.
Figure 7. The Allele tab with settings for using a 20% peak filter. Select the bin set
“Promega_Bins_ID3.2.x.txt”, where “x” refers to the most recent version of the bin set.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA · Toll Free in USA 800-356-9526 · Phone 608-274-4330 · Fax 608-277-2516 · www.promega.com
Printed in USA.
Revised 7/08
Part# TMD017
Page 25