Download ACC-59E_____________________________8

Accessory 59E
Type A and Type B Example 1: ACC-11E and ACC-59E
If using an ACC-11E and ACC-59E, both cards cannot use the same Chip Select because the data
from both cards will be overwritten by the other card.
Type A and Type B Example 2: ACC-11E and ACC-65E
For this example, the two cards are allowed to share the same chip select because the ACC-65E is
a general purpose I/O Type B card. The only restriction in doing this is that the ACC-65E must
be considered the low-byte addressed card and the ACC-11E must be jumpered to either the
middle or high bytes (jumper E6A-E6H).
Connections
7