Download - AcroOptics

Configure Wi-Fi
This Button, located in the lower left-hand corner, allows
the user to connect wirelessly to the CRAVE System fixture.
Network name and password are required. Once
configured, the fixture can be connected to the GUI from
the user settings screen.
Edit Program
This button opens the program configuration screen
for the mode of the program selected. For more
information about the program configuration screens,
please look in the Creating New Programs or Editing
Existing Programs sections below.
Program options vary depending on which mode is
currently selected.
Constant: user programs individual color-channel
intensities only. Saved programs can be loaded by clicking
on the Import Values From scroll menu, located at the
bottom of the screen.
Basic: user programs on time, run duration, and individual
color-channel intensities. CRAVE’s internal timer is
operational and will control the on/off schedule based on
user selected time settings.
Day: user programs time and light settings for both solar
and lunar cycles. User enters sunrise time and duration,
moonrise time and duration, as well as, the starting phase