1
Download GLOFA-GM
Transcript
Chapter 8 Exercising program Program in [Figure 8.2] has used GM_RD Function Block to read data and GM_WR Function Block to write data of slave station No.0. To communicate the program in [Figure 8.2] with slave station No.0~7, prepare each program with slot No. and memory address set as agreed with [Table 8.1] to complete communication programming of dedicated communication master. [Figure 8.3] shows dedicated communication program of master station slot No.5 to communicate with slave station No.5. [Figure 8.3] Communication program with slave station 5 STATION/SLOT NO. SET TO 5 RX TX 8-7
