Download CircuitMaker User Manual

Linear Current-Controlled Current Sources
General Form
FXXXXXXX N+ N- VNAM VALUE
Netlist Example
F1 5 17 VS2 0.5K
Spice Data Example
V%D %3 %4 DC 0V
(measures controlling current)
%D %1 %2 V%D %V
(current source)
N+ and N- are the positive and negative nodes, respectively.
Current flow is from the positive node, through the source, to
the negative node. VNAM is the name of a voltage source
through which the controlling current flows. The direction of
positive controlling current flow is from the positive node,
through the source, to the negative node of VNAM. VALUE
is the current gain. Note: You cannot place current sources
directly in series for SPICE simulation.
See Also
I->I Source
Linear Current-Controlled Voltage Sources
General Form
HXXXXXXX N+ N- VNAM VALUE
Netlist Example
H1 5 17 VS2 0.5K
Spice Data Example
V%D %3 %4 DC 0V
(measures controlling current)
%D %1 %2 V%D %V
(voltage source)
N+ and N- are the positive and negative nodes, respectively.
VNAM is the name of a voltage source through which the
controlling current flows. The direction of positive controlling
current flow is from the positive node, through the source, to
the negative node of VNAM. VALUE is the transresistance
(in ohms). Note: You cannot place voltage sources directly in
parallel for SPICE simulation.
See Also
I->V Source. Example circuit: 741.CKT.
15-264
Chapter 15: SPICE: Beyond the Basics