1
Download User Manual - SuperMax Tools
Transcript
Manual Contents About The SuperBrush System SuperBrush Nomenclature....................................4 Unpacking Your SuperBrush Sander.....................5 Setting Up Your SuperBrush Making Electrical Connections...........................6 Connecting Dust Collectors...............................7 Checking For Machine Level................................7 Checking Brush Alignment...................................8 Checking Table Height Controls........................7 Brush Speed Adjustment........................................8 Checking Conveyor Belt.......................................8 Replacing V-Belt ..................................................20 Rotating/Replacing Bearings..............................21 Replacing Electrical Components.....................23 Electrical Diagrams.................................... 24 & 25 SuperBrush Technical Data SuperBrush Specifications...................................34 Parts List For Stand.............................................27 Parts List For Brush Assembly.............................29 Parts List For Conveyor Assembly......................31 SuperBrush Accessories & Supplies.....................35 Operating Your SuperBrush Basic Operating Procedures..................................9 SuperBrush Operating Controls..........................9 Adjusting Tension Rollers...................................10 Setting Depth of Cut...........................................11 Brush and Bristle Maintenance.........................11 Selecting Stock Feed Rates.................................11 Using The Depth Gauge.......................................12 Monthly Maintenance.........................................12 Tips For Maximum Performance..............12 Troubleshooting Your SuperBrush Troubleshooting Guide: Motors........................14 Troubleshooting Guide: Conveyor....................15 Troubleshooting Guide: Machine......................16 Servicing Your SuperBrush Adjusting Height Controls................................17 Adjusting Table Support Castings......................18 Adjusting Brush Head..........................................18 Leveling Table.......................................................18 Miter Gear Alignment.........................................18 Brush Speed Adjustment......................................19 Replacing Brush........................................... 19 & 20 Replacing Conveyor Belts...................................19 3 FOR YOUR SAFETY: Read all instructions carefully, and note the safety cautions on the opposite page and on the back cover of this manual.
