Download TEK RFA300 Service

Getting Started
3. Follow the instructions on the screen and enter the Windows 95 Product
Identification number (located above the bar code) on the Windows 95
software package that came with your instrument. Enter other information as
required.
The internal setup software automatically configures your instrument and
installs all required devices. After the setup software completes configuration, the RFA300 measurement set application will start.
The next time you power on, the application starts automatically. You do not
need to perform step 3.
Powering Off
Always power off the instrument using the Windows 95 shutdown process, and
then press the On/Standby switch.
NOTE. At least once a month, power down and restart the instrument. The
measurement set performs an internal calibration as part of the power on
procedure. This ensures the optimum measurement accuracy of the instrument.
RFA300 Measurement Set 8VSB Service Manual
2–7