Download Operating instructions GM 5

Transcript
Operating instructions: GM 5
2.1.6 LOUDSPEAKER
the
This key can be used to acknowledge active alarm signals of
instrument.
The alarm sound then will be silenced but the flashing of the alarm LED
can still be seen. The Acknowledgement of all active alarms is indicated in
the application display (
).
Please note, that some alarms are can not be acknowledged or only under
certain circumstances (see 5.3).
2.1.7 ALARM
This key allows setting of the alarm limit for the current
application (see 3.2).
2.1.8 BATTERY
This key shows the present accumulator voltage and the
accumulator capacity.
If the charge state of the instrument falls below 10%, the yellow LED starts
flashing and an alarm sound is heard.
If the voltage drops below a critical value, the device turns ifs elfs off.
-16-