Download Operating instructions GM 5

Operating instructions: GM 5
3.7.2 Evaluate minimum sensitivity tests
To evaluate the test results you have to chose the entry Evaluate (
) in
the selection menu (see section 3.7 Minimum sensitivity test). In the
evaluation menu you can open the different saved test results with the
UP/DOWN key (
).
Here you can open all of the up to 200 results. If a memory place is not
used (no result saved), this is indicated by the date 00.00.00 and the time
00:00:00 and the result “not ok”. The next display shows this case:
3.7.3 Delete minimum sensitivity test results
To delete all test results you have to select the entry Delete (
) in the
selection menu (see section 3.7 Minimum sensitivity test). Thus all test
results will be deleted and the memory counter will be set to zero. During
erasing (approx. 30 s) the red alarm led is shining.
-33-