Download AnyMedia Access System - Alcatel
Transcript
363-211-520 Installing the Batteries Battery Option Battery Option Ordering Batteries 9 The standard configuration of the outdoor AnyMedia ONU does not include batteries. However, the housing is designed to accept four optional type IR-40EC batteries, which are available from Tyco. For ordering information, see the AnyMedia® Access System (24 Channel) Ordering Guide, 363-211-125. For standard installation and connection of the batteries, no special tools are required. The insulated tools listed in Tools and Measurement /Testing Instruments on page 3-4 are required for maintenance, repair, or mounting batteries. Battery description Table 9-1. The batteries are equipped with a 14 AWG lead assembly with a polarized 2-pin connector. The battery cable to the LVD is equipped with four matching connectors.The batteries are illustrated in Figure 9-1. The optional batteries will be delivered packed in a wooden box containing the following: Delivered battery set Qty. Comcode Type Consisting of: 4 407928753 IR-40EC 12-volt, valve-regulated, lead-acid IR Series I battery, with 14 AWG lead assembly terminating with preconnected 2-pin AMP-type plug 1 107078859 157-622-020 Product Manual IR Series Batteries (Issue 7 or later) 8 Screws (2 per battery, thread 10-32 x 0.50)a 1 Battery type labelb a. Already assembled for the 14 AWG lead assembly. Note: These screws are not M5 screws. b. Sticker already attached to the battery. Used for marking the installation date, see Figure 9-4. AnyMedia ONU Installation Manual: Outdoor, Issue 1 June 2002 9-3