Transcript
User’s Manual SB6 With the SB6 you can connect for example lamps. The maximum power use is 6x600Watt lamp and 1x2000Watt Heater. Connecting the SB6 1. Plug the lamps and (optional) heater in the socket of the SB6. 2. Make sure that the clock is switched off (switch the clock on 0) 3. Plug the SB6 in the wall outlet 4. Warning; The maximum amount that can be used on a standard English socket is 13Amps. Never remove the plug when the SB6 is active. 5. Set the clock time and when it should turn the lamps on. 6. Notice; When lamps are on the heater is off and when the heater is on lamps are off. 7. Make sure when you have followed steps 1 up to 6 you can put the switch on the clock back in the middle (on clock). Notes ELF ELECTRO can not be liable for any damage using the SB6
