Download user`s manual - UniPower LLC

XPRT-6kVA, XPRT-10kVA USER’S MANUAL
UNINTERRUPTIBLE POWER SUPPLY (UPS)
FIG 69 – FRONT COVER REMOVAL
3. Grab hold of the battery tray and slide it out. (FIG 70). Be careful during this operation and
consider the weight of the battery.
FIG 70 – BATTERY TRAY REMOVAL
4. Unpack the new battery tray from its box.
5. Place the battery tray in front of the battery compartment, aligning the rear connector to the
front panel.
6. Slide the battery tray into the battery compartment until the rear connector is plugged with the
UPS internal DC socket.
7. Fix the battery grille by tightening screws.
8. Re-install the two front covers.
Xtreme Power Conversion® (XPC) Corporation
Page 65