Download Manual - Centipeak

Volume
The volume of the microphone (or bus) in question received by the current bus.
Pan
The pan of the microphone (or bus) received by the current bus.
(M)ute
Mutes the microphone (or bus) on the bus.
(S)olo
Solo works column by column for drums (by soloing a microphone for one drum, no other drums is
affected. For the buses solo works globally within the bus) muting all but the microphones (or
buses) with solo enabled. Control click the button to remove solo state from all other microphones
(or buses) and make the current microphone (or bus) the only one with solo.
For the drums page some additional controls are available:
Drum Volume
Master volume for the whole drum in relation to the current bus.
Drum Mute
Mutes the whole drum on the current bus.
Drum Solo
Solo mutes all drums on the bus without drum solo enabled.
Every drum has a control menu:
Minimize
Sets the Bus Inputs Control Window in mini-mode, displaying only two (2) columns for a more
managable control window when calibration
of a drum is to be performed in parallel with other tasks.
Default
Loads the default volume and pan for the drum on the bus.
Mute all
Enableds mute for all the microphones
Unmute all
Disables mute for all the microphones
Solo all
Enables solo for all the microphones
Unsolo all
Disables solo for all microphones
Set all to 0dB
Sets all the microphone volumes to 0dB
12