Download IP30 1.2.book - Check Point Software Technologies, Ltd.

Transcript
Configuring the IP30 for Internet Connection
c. Enter the Secondary DNS server IP address.
7. Click Apply.
Static Routes
Static routes allow you to route all traffic to a specified network or
host through a specified router. In IP30 Satellite, upto 5 static
routes can be configured in LAN or when using a Cable modem.
To configure a Static Route
1. Click Setup > Static Routes.
The Static Routes page appears.
2. Click New Route.
The Static Route dialog box appears.
3. Enter the following information:
„ Destination Network
„ Subnet Mask
„ IP address of the gateway
4. Click Add Route.
Note
Static Routes can be added only for gateways on the WAN.
Nokia IP30 User Guide
41