Download USER MANUAL

17
CHAPTER IV - HIGH VOLTAGE
4.6 HV test screen
HV TEST SCREEN
After the test has started, the HV test screen is shown on the
display during the test time.
The test can be aborted by pressing the “ABORT” button.
4.7 Test result screen
After the test is done, the test result appears on the screen. The test result is either PASSED or FAILED:
PASSED SCREEN
When DUT passed the test and the test process is completed,
the green led will light on the front panel and the display
will show the results of the test as seen on the left.
FAILED SCREEN
When DUT fails the test and the test process is completed,
an alarm will sound (if alarm sound setting is ON) together
with the red led lighting on the front panel and the display
will show the cause of the failure of the test as seen on the
left.
By pressing the fly wheel knob the while on the PASSED / FAILED screen, takes you back to the SELECTED TEST SETTINGS
VIEW.