Download FMOD Designer 2010
Transcript
USER MANUAL 171 Granular Synthesis Scenario There are many occasions where a looping sample is required - events such as an automatic machine gun, a car engine idling or background ambience. Unfortunately, if the loop is short in length the resulting sound may become repetitive or artificial, as the audience can hear the point where the sample 'loops'. In this technique section, we will look at how static loops can be replaced by repeating small dynamic sequences – using granular synthesis. Granular synthesis is a method of generating sound using a collection of very small sound samples, commonly referred to as a 'grains'. Solution Dividing the source audio into grains The first step requires the sound designer to cut the loop (or samples) into small 'grains' using their audio editor of choice. For example, if the audio loop is a machine firing 10 rounds, the file could be divided, with each round becoming a grain file. Within FMOD Designer 2010, grain sample can be as small as 35 ms in length. The sound designer must be careful to make sure each grain starts and stops on a zero crossing. If any grain starts or stops on a value other than zero, an audible click may be introduced. Setting up the Sound Def Within FMOD Designer 2010, all the 'grain' samples are placed in a Sound Def. The following Sound Def properties must be set: Play mode: set to 'Random', 'RandomNoRepeat' or 'Shuffle' Spawn time: 1 (minimum) and 1 (maximum) These settings tell the FMOD engine to attempt to select and play a random grain each millisecond. Setting up the sound instance Add the Sound Def to an event layer and set the following sound instance properties: 'Start mode' to 'Wait for previous' 'Loop mode' to 'Oneshot'. These settings tell the FMOD engine join the current sample and the next sample together (in a seamless manner), and to not loop playback of the current sample.