Download SR5500 User Manual - Spirent Knowledge Base

240 | SR5500 User Manual
7.2.1.
Input Signal Level
Input Signal level
+5 to -50 dBm
Autoset Range
+5 to -32 dBm (Crest Factor 15dB)
Damage Level
7.2.2.
+20 dBm
Output Signal Level
Range
-30 to -110 dBm
Resolution
0.1 dB
Accuracy
+/- 1 dB
Damage Level
+20 dBm
7.2.3.
Channel Crest Factor
Range
15 to 35 dB
Effect on I/O Ranges
Max Input Level = (15 – Crest Factor Setting) dBm
Min Input Level = (-15 – Crest Factor Setting) dBm
Max Output Level=(-15 – Crest Factor Setting) dBm
Min Output Level = -110 dBm
Absolute Channel Delay
In to Out
7.2.4.
< 4.0 µs
Spurious Emission Levels
Spurious Emission Levels
Within Channel
- 40 dBc maximum
Outside Channel within 400 to 2700 MHz
-10 dBc maximum
7.2.5.
Residual EVM
Better than -36 dB, typical per subcarrier measured at -50 dB output power; actual value
depends upon signal format, symbol rate, etc.