Download User`s Manual

2. The Robotic Platform
The Disc Makers ReflexAuto autoloader with (100 Disc Capacity) has two spindles (see Figure 1-3) that
hold approximately 100 discs each, (Actual quantity varies depends on the media thickness). Spindle 2 is
the input spindles. Spindle 1 is the output spindle. Stack the media you wish to copy on spindle 2 (see
figure 1-2 from proper media stacking). The robotic arm will pick discs from spindle 2 then place the
successfully copied discs onto spindle 1. Reject discs are placed on to the deck below the drive
trays. (Throughout this manual, this area is also referred as “Reject Area”).
Figure 1-3 Robotic Duplicator Top View
4