Download KD7 RECORDER USER`S MANUAL

8.5 Programming logic channel parameters
After selecting the
edition window is opening
icon in the KD7 Control Panel window, the logic channel
8.5.1. Programming General, Visualization and Common parameters
After selecting Input icon in the KD7 Control
Panel window, select one of the accessible logic
channels in the General tab for Configuration.
Selection of the
logic channel
Copying of parameters to
another logic channel
Next, transit to the selection and configuration of the selected measuring input in the given logic
channel.
1.
When the recorder is arranged in the version without mathematical functions or these functions,
are disabled (see. Section 7.10.3.3.), analog measuring inputs AI 1..12
(see section 7.10.3.2.), interface Modbus Master inputs CI 1..24 (see section 7.10.3.1.),
binary inputs BI 1..16 (see section 7.10.3.4.), alarms (A1/A2) logic channels 1…32 (see
section 7.10.3.5) and totalizers of logic channels 1..32 (see section 7.10.3.6) are available for
the configuration.
2. When the recorder is arranged in the version with active mathematical functions
(see section 7.10.3.3.), analog measuring inputs AI 1..12 (see section 7.10.3.2.),
interface Modbus Master inputs CI 1..24 (see section 7.10.3.1.), mathematical functions
MT 1…16 (see section 7.10.3.3.), Binary inputs BI 1…16 ( see section 7.10.3.4.), alarms
A1/A2 of logic channels 1…32 (see section 7.10.3.5.) and totalizers of logic channels 1..32
are available for the configuration.
77