Download UNIDEX 600 Series PROGRAMMING MANUAL

Transcript
U600 Series Programming Manual
ERROR CODES
The syntax is incorrect.
Invalid PSOM Syntax
The syntax is incorrect.
Invalid PSOP Syntax
The syntax is incorrect.
Invalid PSOR Syntax
The syntax is incorrect.
Invalid PSOT Syntax
The syntax is incorrect.
Invalid PSOC 4 Configuration, last two numbers must add up to 3
The I/O bits were not configured properly. See manual for valid options.
Invalid PSOC Input
The specified input is not valid. Is it configured as an input by the PSOC,4 command.
Invalid PSOC Level
The valid levels are 0, 1 or x (don’t care).
Invalid PSOC type, must be 0,1,2, or 3
These are the only valid forms of the PSOC command
Invalid PSOD type, must be 0,1, or 2
These are the only valid forms of the PSOD command.
Invalid PSOF type, must be 0,1,2,3,4 or 5
These are the only valid forms of the PSOF command.
Invalid PSOM type, must be 0
The PSOM,1 command is not supported on UNIDEX 600/631.
Invalid PSOP type, must be 0,1,2,3,4 or 5
Version 1.2
Aerotech, Inc.
C-17