Download Model : RF30 User Manual

5.2.3.1 Pop-up Windows
To use the Web Configuration Interface, you need to disable pop-up blocking. You
can either disable pop-up blocking, which is enabled by default in Windows XP
Service Pack 2, or create an exception for your RF30’s IP address.
Disabling All Pop-ups
In Internet Explorer, select Tools > Pop-up Blocker and select Turn Off Pop-up
Blocker.
You can also check if pop-up blocking is disabled in the Pop-up Blocker section in
the Privacy tab of the Internet Options dialogue.
1. In Internet Explorer, select Tools > Internet Options.
2. Under the Privacy tab, clear the Block pop-ups checkbox and click Apply to save
your changes.
Enabling Pop-up Blockers with Exceptions
*!
!
7
!
#
1. In Internet Explorer, select Tools > Internet Options.
2. Under the Privacy tab, click Settings to open the Pop-up Blocker Settings
dialogue.
3. Enter the IP address of your router.
4. Click Add to add the IP address to the list of Allowed sites.
5. Click Close to return to the Privacy tab of the Internet Options dialogue.
6. Click Apply to save your changes.
User Manual v5.0
143 / 203