Download Mask Integrity Test Accessory (MITA ) Model 8120 Operator`s Manual
Transcript
DT Zero Leak Volume (enter value) cc. Volume of the drink tube zero leak DT Zero Leak Max (enter value) sccm If leak measures above this value the test fails EV Target Pressure in.H2O The EV leak test starts at this pressure EV Zero Leak Max (enter value) sccm If leak measures above this value, the test fails EV Blockage Press (enter value) in.H2O If backpressure measures above this value, the test fails Bladder Test Pressure (enter value) psi The starting pressure the bladder is inflated to during the bladder self check Bladder Inflate Time (enter value) sec The maximum time allowed for the bladder to inflate during the bladder self check Bladder Decay Pressure (enter value) psi The maximum pressure the bladder is allowed to decay during the bladder self check Bladder Decay Time (enter value) sec The time allowed for the bladder pressure to decay during the bladder self check Mask Min. Purge Time (enter value) sec The minimum time required to purge the mask of aerosol concentration Mask Max. Purge Time (enter value) sec The minimum time required to purge the mask of aerosol concentration Mask Test Presample Time (enter value) sec The Mask PF test will delay for this may seconds before staring the mask sample Mask Min Sample Time (enter value) sec The Mask PF test will sample the mask port for at least this many seconds Mask Max Sample Time (enter value) sec If the calculated mask sample time exceeds this many seconds, a low particle concentration warning will be displayed Mask Test Flow (enter value) L/min The Mask PF test will run at this flow Mask Vacuum (enter value) in.H2O The Mask PF test will run at this vacuum Protection Factor (enter value) The Mask PF must read at least this high to pass the self check using Mask Bypass Adapter User Adjustable Settings 6-13