Download KTA70M/mITX
Transcript
KTD-N0861-B Page 60 Function Selection System Temperature Ext Type (note1) Disabled LM75 @ 0x90 OneWire @ GPIO16 Fan Cruise Control (System Fan) Disabled Thermal Speed Fan Settings (System Fan) 30 – 90 (note2,note3) 1000 – 9999 (note4) Fan Min limit (System Fan) 0 (note5) Fan Max limit (System Fan) (note5) Description (note2) Minimum PWM %, can be used to make sure fan is always active. Make sure Min limit < Max limit. (note6) Maximum PWM %, can be used to limit the fan noise. Make sure Min limit < Max limit. Fan Cruise Control (CPU Fan) Disabled Thermal Speed Fan Settings (CPU Fan) 30 – 90 (note3) 1000 – 9999 (note4) Fan Min limit (CPU Fan) 0 Fan Max limit (CPU Fan) Disabled = Full speed. Thermal: Regulate according to specified ºC. Speed: Regulate according to specified RPM. (note6) Minimum PWM %, can be used to make sure fan is always active. Make sure Min limit < Max limit. (note6) Maximum PWM %, can be used to limit the fan noise. Make sure Min limit < Max limit. 100 (note7) Watchdog Function 0 - 255 Disabled = Full speed. Thermal: Regulate according to specified ºC. Speed: Regulate according to specified RPM. (note6) 100 (note7) BIOS - Advanced (note8) 0 = Disabled. Enter the service interval in seconds before system will reset. Refer to manual how to reload the timer. Note1: Only visible if external temperature sensor is connected. (Example PN1053-4925 “Cable Temperature Sensor - 44P, 400 mm”). Note2: Only visible if external temperature sensor is connected and selected. Note3: ºC (if Fan Cruise Control = Thermal) use either digit keys to enter value or +/- keys to increase/decrease value. Don’t use mix of digit keys and +/- keys. Note4: RPM (if Fan Cruise Control = Speed) use either digit keys to enter value or +/- keys to increase/decrease value by 100. Don’t use mix of digit keys and +/- keys. Note5: Only visible if external temperature sensor is connected and if System Fan Cruise Control is Thermal. Note6: Use number keys to enter value. Note7: Only visible if CPU Fan Cruise Control is Thermal. Note8: Seconds, use digit keys to enter value. Value 0 means Watchdog is disabled. Refer to “KT-API-V2 User Manual” to control the Watchdog via API or refer to “KT-API-V2 User Manual DLL” how to control Watchdog via Windows DLL. KTA70M/mITX Users Guide KTA70M/mITX Users Guide