Download PG-FP5 V2.13 Flash Memory Programmer User`s Manual RL78, 78K

PG-FP5 V2.13
PROGRAMMING GUI USAGE
<When using 78K (other than 78K0S/Kx1+, UPD78F9334), V850E1, V850ES, RL78 family>
Method: Subtraction (16-bit arithmetic)
Range: Area set in the [Operation Mode] area on the [Standard] tab in the Device Setup dialog box
>sum
Code flash: 0x8FCD
Data flash: 0x1000
Total:
0x9FCD
PASS
Checksum operation finished.
>
Figure 1.41 Action Log Window After [Checksum] Command Execution <When using 78K (Other than
78K0S/Kx1+, UPD78F9334), V850E1, V850ES, RL78 family>
Note
With the 16-bit arithmetic (subtraction) mode, the lower 4 digits of the result from which a value is subtracted
from 00h in 1-byte units are displayed.
<When using a 78K0S/Kx1+ microcontroller or UPD78F9334>
Method: Division (original)
Range: Area set in the [Operation Mode] area on the [Standard] tab in the Device Setup dialog box
>sum
Device Checksum: 0x1842
FP5 Checksum:
0x1842
Checksum compare: PASS
Checksum operation finished.
>
Figure 1.42 Action Log Window After [Checksum] Command Execution (When using 78K0S/Kx1+
microcontroller or UPD78F9334)
Note
For details on the arithmetic specifications, refer to Common APPENDIX B SUPPLEMENTARY INFORMATION
Figure B.4 Division (Original) Calculation Specifications.
<V850E2>
Method: 32-bit CRC
Range: Area specified in the [Operation Mode] area on the [Standard] tab in the Device Setup dialog box
>sum
Code flash: 0x370A7BE5
Data flash: 0xBFD1B03F
Total: 0xF6DC2C24
PASS
Checksum operation finished.
>
Figure 1.43 Action Log Window After [Checksum] Command Execution (V850E2)
Note
32-bit CRC displays the 8-digit result of CRC32 function operation. For the calculation specifications, refer to
Common APPENDIX B SUPPLEMENTARY INFORMATION Figure B.2 32-bit CRC Calculation Specifications.
R20UT2923EJ0200 Rev.2.00
Mar 02, 2015
Page 36 of 80