Download User and Installation Guide

Transcript
Menu
Depth Sounder Window
32
MENU
The menu bar, displayed at the top of the screen, allows selecting
from the following options:
Elite3
33
DEPTH SOUNDER WINDOW
A depth sensor can be interfaced
with the GEONAV via NMEA.
In this case, the GEONAV automatically enables the depth
sounder function, displaying a
graph of sea depth.
TRACK: To activate/deactivate the track function and to delete a
track saved.
ROUTE: To delete, reverse, store, recall a route and display route
information.
The depth scale, whose unit can be
selected from the menu in meters,
feet or fathoms, will change automatically to show deeper or shallower water.
SETUP: To activate/deactivate the plotter’s setup.
In Navigation mode, press PAGE
until the depth sounder window appears.
The window will display the following data:
• Sea depth
• Depth scale
• Sea temperature (if available)
When navigating in waters deeper than sounder access range or if
the boat’s speed is too high for depth sounding, data acquisition
will be interrupted and the number replaced by “—”.
To deactivate the depth sounder window, press PAGE.