Download AD-080GE Manual

AD-080GE
3.
Main Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C3 Advanced series progressive scan camera
GigE Vision, GenICam compliant
Multi-spectral 2-channel CCD camera
Simultaneously captures Visible and Near-IR through the same optical path
1/3” progressive scan IT CCDs with 1024 (h) x 768 (v) active pixels
4.65 μm square pixels
RGB 24-bit or 30-bit or Raw Bayer 12- or 10- or 8-bit output for visible
12- or 10- or 8-bit output for Near-IR
30 frames/second with full resolution
Variable partial scan is available with user-definable height and starting line
Programmable exposure from 0.5L(20μs) to 792L(33ms)
Edge Pre-select, Pulse Width Control and Reset Continuous trigger modes
Sequence trigger mode for on-the –fly change of gain, exposure and ROI
Delayed read out mode for smooth transmission of multi camera applications
Blemish compensation built-in
Shading compensation circuit built in
LUT (Look Up Table) for gamma correction
Knee point and Knee slope can be adjusted
AGC (Automatic Gain Control) from -3dB to 21dB
LVAL synchronous/asynchronous operation (auto-detect)
Auto-iris lens video output for lens control
Programmable GPIO with opto-isolated inputs and outputs
Comprehensive software tools and SDK for Windows XP/Vista (32 bit “x86” and 64
bit “x64” JAI SDK Ver. 1.2.1 and after )
7