Download MPC8BUG USER`S MANUAL

MPC8BUG USER'S MANUAL
UPM
DISPLAY/MODIFY UPM SETUP
4 . 2 . 3 6 Display/Modify UPM Setup
UPM [:B] [entry_number1 [entry_number2]]
and
UPM [:B] entry_number, value1 [value2 ...]
where:
<:B>
Specifies the UPM, either A or B.
<entry_number>
Specifies the UPM entry number. If two entry numbers are specified, that
range is displayed.
<value1 etc.>
Specifies the values that the UPM should be written with, beginning with
the specified entry number.
EXAMPLE 1
Display UPM B Contents
MPCbug> UPM B <CR>
EXAMPLE 2
Display UPM B Entry 3
MPCbug> UPM B 3 <CR>
EXAMPLE 3
Display UPM B Entry-Range 3 to 5
MPCbug> UPM B 3 5 <CR>
EXAMPLE 4
Modify UPM B Starting with Entry 3
MPCbug> UPM B 3, 00ffec00 37ffec47 ffffffff ffffffff <CR>
69