Download pdf format - York University

Transcript
Scott MacKenzie
Dept. of Computing and Information Science
University of Guelph
Guelph, Ontario
Canada N1G 2W1
Voice: 1-519-824-4120 Ext. 8268
Fax:
1-519-837-0323
Email: [email protected]
This manual assumes a basic knowledge of PC computers and MS-DOS. The reader
should be comfortable with
•
•
•
•
The most common MS-DOS commands
Entering key combinations such as CTRL+F4 or ALT+E
Drives, files, directories, paths
Changing the default directory or drive
The 68KMB interfaces with the PC host computer through a COM port. The host
computer must have at least one available COM port.
At numerous points throughout these labs, reference is made to "your textbook". These
labs are intended to accompany The 68000 Microprocessor textbook in forming a
complete course to learn about the 68000 microprocessor. References to "your lab
instructor" are made when the student must obtain expert assistance with a problem or
demonstrate the solution to a problem.
The labs are organized using checkpoints. A checkpoint is indicated by the following
symbol:
x.y
4
The code x.y indicates the sequence of checkpoints with x indicating the lab number, and y
indicating the checkpoint within a lab. When the student reaches a checkpoint, the results
of the preceding steps should be demonstrated to the lab instructor. Lab instructors may
maintain a record of checkpoints to assign marks or to gauge students' progress as each
lab is completed.
iii