Download User`s Manual 4-CH Color Quad Processor

4-CH Color Quad Processor
U se r 's Ma n u a l
Before attempting to operate this product,
please read these instructions completely
Color Quad Processor
1. BRIEF INSTRUCTION ……………………………………………………………… 1
1.1 Important information ……………………………………………………………… 1
1.2 Feature … …… …… … …… …… … ………… … …… …… … …… …… … …… …1
2. THE FRONT PANEL … …… …… … …… …… … …… …… … …… …… … …… … 1
3. MENU SET … …… …… … …… …… … ………… … …… …… … …… …… … …… …2
3.1 Title set … …… …… … …… …… … ………… … …… …… … …… …… … …… …2
3.2 Date and time set … … … … … … … … … … … … … … … … … … … … … … … … …2
3.3 Display set … …… …… … …… …… … …… …… … …… …… … …… …… … …… 3
3.3.1 AUTO set
3.3.2 PIP set
… … … …… … … … … …… … … … … … …… … … … … …… … … …3
… …… …… … …… …… … …… …… … …… …… … …… …… … …… 3
3.3.3 Picture set ……… …… … …… ……… …… …… … …… ……… …… …… … … 4
3.3.4 Boundary set ………………………………………………………………………4
3.3.5 Mirror set ………………………………………………………………………… 4
3.3.6 System set …………………………………………………………………………4
3.4 Alarm motion set ………………………………………………………………………5
3.4.1 Alarm set
…………………………………………………………………………… 5
3.4.2 Motion set ……………………………………………………………………………5
3.4.3 Alarm history …………………………………………………………………………6
3.4.4 Alarm time …………………………………………………………………………… 6
4. ALARM OUTPUT ……………………………………………………………………… 6
1
BRIEF INSTRUCTION
1.1
Important Information
Before using our product, please read this user's Manual carefully. Thank you for your selecting
our color QUAD processor, and this Manual will introduce the feature, setup menus and operation modes of the processor to help you know our product as soon as possible.
Complete the following product information. The factory requests this information when for
contacting for technical support. It is valuable in case of loss or theft.
Purchase Date:
Serial Number:
Dealer:
1.2
FEATURES
(1) On-screen display includes Date and Time.
(2) Motion detect with 48 areas and 256 level sensitive.
(3) In the PIP modes, you can select one\two or three sub-window modes.
(4) AUTO switch PIP modes.
(5) Alarm output with two modes: Low, High
(6) Display the picture, which has detected motion, alarm.
(7) All the windows can be freeze at the same time.
(8) Duplex operate with Playback of VCR.
(9) Auto switch PIP and single picture.
(10) Switch system to PAL or NTSC.
2、THE FRONT PANEL
MENU
AUTO
QUAD/PIP
PB
ZOOM
FREEZE
CH1
CH2
CH3
CH4
Annotation:
(*L)-Press button continuously for 2 seconds to enter menu options.
(**S)-Press button enter menu options.
(1) MENU
Press "MENU" bottom (*L) to enter menu set mode
Press "MENU" bottom (**S) to enter QUAD and PIP mode.
Press "AUTO" bottom (*L) to enter playback (PB) mode and press
CH1/…CH4 again to into the full screen display. Press, "AUTO"
(**S) to return. Press "AUTO" bottom (**S) to enter AUTO mode,
in the menu, you can used it as "EXIT".
After you press "ZOOM" bottom (**S), and press "CH1/CH2/CH3
/CH4" to select the region which you want to enlarg. Then press
"AUTO" to operate.
First time to press it the windows will be frozen. Press it again to cancel.
On-screen display CH1/UP
On-screen display CH2/DOWN
On-screen display CH3/LEFT/Decrease/Into the submenu
On-screen display CH4/RIGHT/Increase/Into the submenu
(QUAD PIP)
(2) AUTO
(3) ZOOM:
(4) FREEZE
(5) CH1
(6) CH2
(7) CH3
(8) CH4
1
3. MENU SETUP
Press "MENU" bottom (*L) to enter into the menu mode. Press "↑"or "↓" bottom to select
the function menu and Press " + "or" - " to enter. Press "AUTO" button to ESC.
SETUP MODE
TITLE SET
TIME/DATE SET
DISPLAY SET
ALARM MOTION SET
3.1 TITLE SETUP
In the main menu, Press "↑"or "↓" button to move cursor to "TITLE SET". Press "+"or"-" button
to enter. Press "AUTO" button to ESC.
TITLE SETUP
SETUP MODE
CH1: CH1-CH2: CH2-CH3: CH3-CH4: CH4-DISPLAY: ON/OFF
TITLE SET
TIME/DATE SET
DISPLAY SET
ALARM MOTION SET
3.2 TIME /DATE SETUP
In the setup menu, press
or
bottom to move the cuusor to the "DATE/TIME SET".Press
"+"or"-" button to enter. Press " "or " " bottom to the option menu. Press "+"or"-" button
to adjust date and time. Press "AUTO" button to ESC.
Date setting: YY-MM-DD (Year-Month-Day):
YY (Year): Range from 00 to 99
MM (Month): Range from 01 to 12 DD(Day): Range from 01 to 31
Time setting: HH-MM-SS (Hour-Minute-Second):
HH (Hour): Range from 00 to 23
MM (Minute): Range from 00 to 60
SS (Second): Range from 00 to 60
Time zone form: ASIA: YY-MM-DD
EURO: DD-MM-YY
U S: MM-DD-YY
DATE/TIME
DATE: YY-MM-DD
TIME: HH-MM-SS
FORMAT:ASIA/EURO/U.S
DISPLAY: ON/OFF
SETUP MODE
TITLE SET
TIME/DATE
DISPLAY SET
ALARM MOTION SET
2
3.3 DISPLAY SETUP
In the setup menu, press " "or " " bottom to move the cursor to the "DISPLAY SETUP"
and press "+"or"-" to enter. When you enter into the " DISPLAY SETUP" you can see
and press "+"or"-" to enter. Press "AUTO" button to ESC.
DISPLAY SETUP
SETUP MODE
AUTO SET
PIP SET
PICTURE SET
BOUNDARY SET:WHITE
MIRROR SET
SYSTEM SET:PAL
TITLE SET
TIME/DATE
DISPLAY SET
ALARM MOTION SET
3.3.1 AUTO SET
Move cursor to "AUTO SET". Press "↑"or"↓"to enter, press "+"or "-" button to select,the
channel that you want to adjust. Press " AUTO" button to ESC.
DISPLAY SETUP
AUTO SET
AUTO SET
PIP SET
PICTURE SET
BOUNDARY SET:WHITE
MIRROR SET
SYSTEM SET:PAL
CH1:
CH2:
CH3:
CH4:
OFF / 01-99 S
OFF / 01-99 S
OFF / 01-99 S
OFF / 01-99 S
3.3.2 PIP SET
PIP SET
DISPLAY SETUP
MAIN
SUB1
SUB2
PIP1: CH1/CH4 CH1/CH4
AUTO SET
PIP SET
PICTURE SET
BOUNDARY SET:WHITE
MIRROR SET
SYSTEM SET:PAL
PIP2: CH1/CH4 CH1/CH4 CH1/CH4
PIP3: CH1/CH4 CH1/CH4 CH1/CH4
PIP SEQ: MAIN/SUB
LOCATION: LOCAL1 / LOCAL4
3
3.3.3 PICTURE SET
Move cursor to " PICTURE SET", press "+" or "-" button to enter the item, press"↑" or "↓"
button to adjust the "BRIGHT" and "CONTRAST", press "AUTO" button to ESC.
DISPLAY SETUP
BRIGHT/CONTRASTADJUST
AUTO SET
PIP SET
PICTURE SET
BOUNDARY SET:WHITE
MIRROR SET
SYSTEM SET:PAL
BRI: [ ]
CON: [ ]
BRI: [ ]
CON: [ ]
BRI: [ ]
CON: [ ]
BRI: [ ]
CON: [ ]
3.3.4 BOUNDARY
Move cursor to "BOUNDARY", press "+" or "-" button to enter the item, and adjust the color
of boundary: OFF, Gary, WHITE, BLACK. Press "AUTO" button to ESC.
DISPLAY SETUP
AUTO SET
PIP SET
PICTURE SET
BOUNDARYSET:
WHITE/GRAY/BLACK/OFF
MIRROR SET
SYSTEM SET:PAL
3.3.5 MIRROR SET
Move cursor to " MIRROR SET", press "+" or "-" button to enter the item. Press "↑" or "↓"
button to select the channel that you want to set, and press "↑" or "↓" button again to turn
on or off this function. Default is OFF. Press "AUTO" button to ESC.
DISPLAY SETUP
AUTO SET
PIP SET
PICTURE SET
BOUNDARY SET:WHITE
MIRROR SET
SYSTEM SET:PAL
MIRROR SET
CH1: OFF/ON
CH2: OFF/ON
CH3: OFF/ON
CH4: OFF/ON
3.3.6 SYSTEM SET
Move cursor to "SYSTEM SET", press "+" or "-" button to enter the item. Press "+" or "-" button
again to switch system to PAL or NTSC, Default is PAL. Press " AUTO" button to ESC.
4
DISPLAY SETUP
AUTO SET
PIP SET
PICTURE SET
BOUNDARY SET: WHITE
MIRROR SET
SYSTEM SET: PAL/NTSC
3.4 ALARM MOTION SET
In the main menu, press "↑" or "↓" button to move cursor to "ALARM MOTION SET", press
"+" or "-" button to enter the submenu, it includes: ALARM SET, MOTION SET, ALARM
HISTORY, ALARM TIME. Press "↑" or "↓" button to select the item you want to set. And
press "+" or "-" button to enter the under item. Press " AUTO" button to ESC.
SETUP MODE
ALARM MOTION SET
TITLE SET
TIME/DATE
DISPLAY SET
ALARM MOTION SET
ALARM SET
MOTION SET
ALARM HISTORY
ALARM TIME: 05 SEC
3.4.1 ALARM SET
Move cursor to "ALARM SET", press "+" or "-" button to enter the item. There are three
choices: OFF, LOW and HIGH. Default is "OFF", when you select "HIGH" or "LOW" , you
must make sure the output polarity of your alarm equipment which you is connect. Press
"AUTO" button to ESC.
ALARM SET
ALARM MOTION SET
ALARM CH1: OFF/HIGH/LOW
ALARM CH2: OFF/HIGH/LOW
ALARM CH3: OFF/HIGH/LOW
ALARM CH4: OFF/HIGH/LOW
ALARM SET
MOTION SET
ALARM HISTORY
ALARM TIME: 05 SEC
3.4.2 MOTION SET
Move cursor to "MOTION SET", press "＋" or "-" button to enter the item. Press "↑" or "↓"
button to select the item, then use "+" or "-" button to turn on or off. The default of "FRAME"
is "04", "SENSITIVE" is "008" (value is low, sensitive is high).
5
ALARM MOTION SET
MOTION SET
ALARM SET
MOTION SET
ALARM HISTORY
ALARM TIME: 05 SEC
CHANNEL: CH1/CH4
FRAME: 00/15
MOTION EA: OFF/ON
SENSITIVE: 000/255
AREA SET
Move cursor to "AREA SET", press "＋" or "-" button enter to a picture which will display 48
characters "M", it means the motion function is open when area display character "M", if you
turn off the "M", motion function will be close. Press "ZOOM" or " FREEZE" button to open
or close the character "M". Use"↑", "↓", "+" or "-" button to move. Press " AUTO" button to
ESC.
3.4.3 ALARM HISTORY
Move cursor to "ALARM HISTORY", press "＋" or "-" button to enter the history list, then use "↑"
or "↓" button to page down or up, there are 9 pages, 89 events. Press "AUTO" button to ESC.
Attention : A: Alarm, L: Video loss, M: Motion
*
ALARM MOTION SET
ALARM SET
MOTION SET
ALARM HISTORY
ALARM TIME: 05 SEC
3.4.4 ALARM TIME
Move cursor to "ALARM TIME", press "＋" or "-" button to adjust the time of buzzer, which
ranges from 1 to 99 seconds, default is 05 SEC. Press "AUTO" button to ESC.
ALARM MOTION SET
ALARM SET
MOTION SET
ALARM HISTORY
ALARM TIME: 05 SEC
4. ALARM OUTPUT
1
2
3
4
5
A1arms input 1
A1arms input 2
GND
A1arms input 3
A1arms input 4
6
7
8
9
COM
NO
NC
NONE
6