Download MX Series SCPI Programming Manual

CSW Series SCPI Programming Manual
7.3
AMETEK Programmable Power
Questionable Status Group
The Questionable Status registers record signals that indicate abnormal operation of the AC
source. As shown in Figure 7-1, the group consists of the same type of registers as the
Status Operation group.
Register
Command
Description
Condition
STAT:QUES:COND?
A register that holds real-time status of the
circuits being monitored. It is a read-only
register.
Event
STAT:QUES:EVEN?
A register that latches any condition. It is a
read-only register that is cleared when read.
Enable
STAT:QUES:ENAB <n>
A register that functions as a mask for
enabling specific bits from the Event
register. It is a read/write register.
Table 7-3: Questionable Status Register
The outputs of the Questionable Status group are logically-ORed into the QUEStionable
summary bit (3) of the Status Byte register.
CSW Series
161