Download SAFETY TEST REPORT
Transcript
EN 60065 Clause Requirement – Test 3 GENERAL REQUIREMENTS P Safety class of the apparatus .................................: Class I P 4 GENERAL CONDITIONS OF TESTS P 4.1.4 Ventilation instructions require the use of the test box 5 MARKING P Comprehensible and easily discernible P Permanent durability against water and petroleum spirit P Identification, maker, model ....................................: Refer to marking label P Class II symbol if applicable N Rated supply voltage and symbol ..........................: 100-240V~ P Frequency if safety dependant P 5.1 Result - Remark Verdict Yes P 50/60Hz Rated current or power consumption .....................: Max 35W for model 19L****, 20L**** and 22L****, Max 40W for model 23L****, See appended Table 5.1 P Earth terminal Class I equipment P Hazardous live terminals No such terminal N Supply output terminals (other than mains) No such terminal N 5.3 Use of triangle with exclamation mark Such symbol is indicated on circuit diagram for specific components. P 5.4 Instructions for use User’s manual is provided in English P 5.4.1 Mains powered equipment not exposed to dripping Refer to user manual. or splashing. Warning concerning objects filled with liquid, etc. P Hazardous live terminals, instructions for wiring Not applicable N Instructions for replacing lithium battery No lithium battery N Instructions for modem if fitted No any modem N 5.2 5.4.2 Class I earth connection warning P Instructions for multimedia system connection P Special stability warning for fixed installation N Disconnect device: plug/coupler or all-pole mains switch location, accessibility and markings All pole switch used. P Instructions for permanently connected equipment Not a permanently connected equipment. N Safety Test Report #: SHE-1007-10462-LVD Prepared for Shenzhen KTC Technology Co., Ltd. Prepared by EMC Compliance Management Group. Page 5 of 48