Download ABRITES Commander for VAG User Manual

Key Learning “Standard mode”:
Then you've to select “VW Passat B6/CC with EDC17/MED17 (CAN)” from the key-learning
dialog. To learn a key to this car you should make first a dealer key. This is made by pressing the
“Program dealer key” button which brings the following dialog:
Here you've to put the PIN code, after that to load the comfort module EEPROM dump, and the
“Program” button will become active.
After pressing the “Program” button you should perform exactly the same procedure as the
manual procedure for the Passat (I.e. you will need to change the position of the key in the
programmer, then in the ignition lock, than back in the programmer, then back in the ignition lock,
and so on until the dealer key is done. When the transponder is ready, you will have all the
component security bytes displayed in the status bar).
After having the dealer key you can learn it in absolutely the same way as for the Passat B6/CC
with EDC16 or MED9.