Download MCUEZDBG0508 User Guide - Freescale Semiconductor

Operating Procedures
The Breakpoint Setting dialog consists of:
•
A list box which displays a list of currently defined breakpoints
•
Breakpoint: group box which displays the address of the currently
selected breakpoint, name of executable file, name of procedure in which
the breakpoint has been set, the state of the breakpoint (disable or not)
and type of breakpoint (temporary or permanent).
•
Add button: Adds a new breakpoint at the address specified in the
Address edit box
•
Delete button: Click Delete to remove the currently selected breakpoint.
•
Update button: Updates changes made to an existing breakpoint
•
OK button: Click OK to accept all modifications.
•
Cancel button: Click Cancel to retain all previous settings.
•
Help button: Click Help to open the help file and associated information.
The list box allows multiple consecutive breakpoints to be selected. Select a
breakpoint, then hold the Shift key, and select another breakpoint.
Select multiple non-consecutive breakpoints by selecting a breakpoint, then
holding the control (Ctrl) key, and selecting other breakpoints.
When selecting multiple breakpoints, the name of the group box Breakpoint:
changes to Selected breakpoints: and the associated controls Address (hex)
and Name: are disabled.
4.9.1 Breakpoint Symbols
A temporary breakpoint has this symbol :
.
A permanent breakpoint has this symbol:
.
A disabled breakpoint has this symbol:
User’s Manual
80
.
MCUez HC05/HC08 Debugger
Operating Procedures
MOTOROLA