Download CS User Manual

Transcript
U|g|CS User manual, v.2.5
Disabling NFZ
To disable NFZ, enter route settings and deselect either Aerodrome NFZ or Custom NFZ, whichever you
want to not take into account when creating the route (Figure 48).
Note: Your application should be activated to do this (refer par. “License”)!
Figure 48. NFZ visibility
To change the visibility of NFZ, click on the Layers button at the very top right-hand corner of the screen.
A menu will appear in which you will be able to deselect Aerodrome NFZ or Custom NFZ so that they are
not displayed on the map (Figure 18). Keep in mind that this does not disable the NFZ, it simply hides
them. If you want to disable NFZ, refer to the section “Disabling NFZ”.
NFZ and route-creation algorithms
You will not be able to calculate a mission with single waypoints in a NFZ. However, if a part of a circle or
an area scan mission intersects a NFZ, the flight path will be calculated around the NFZ automatically
(refer par. “NFZ”). Also the result of calculation should include correct fly-by of buildings (refer par.
“Building”).
48