Download SBE 48 Hull Temperature Sensor

Transcript
Section 4: Deploying and Operating the SBE 48
Sampling Modes
The SBE 48’s user-selectable sampling modes for obtaining data include:
• Polled Sampling
• Autonomous Sampling - Interval Sampling and Continuous Sampling
• Serial Line Synchronization
Commands can be used in various combinations to provide a high degree of
operating flexibility.
Descriptions and examples of the sampling modes follow. Note that the
SBE 48’s response to each command is not shown in the examples. Review
the operation of the sampling modes and the commands described in
Command Descriptions before setting up your system.
Polled Sampling (Operating commands)
The SBE 48 takes one sample of data and sends the data to the computer.
Storing of data in the SBE 48’s FLASH memory is dependent on the particular
command used.
Example: Polled Sampling
Establish communication with SBE 48. Command SBE 48 to take
a sample and send converted data to computer (do not store data
in memory). Send power-off command to SBE 48.
(click Connect on Toolbar)
S>TS
S>QS
17