Download Shelf Logic

Section 9 – Display Options
Shelf Logic Enterprise Edition has many viewing options, including among these is the ability to
show the display in various views. These are Front View, Top View, Side View, Side View with
Cross Section, and fully rotatable 3D view.
Since you can have up to 10 plan/floor windows at the same time, you can have the same plan
displayed in multiple windows with different views. So the front and side views can be seen
together.
Front View
Menu:
Keyboard Shortcut:
View/Views/Font View
Shift-F1
This shows the front view of the plan. This is the only view that allows you to work with and
move products. The other views are ‘view only’ and changes can’t be made to the plan.
Top View
Menu:
Keyboard Shortcut:
View/Views/Top View
Shift-F3
The top view shows the plan looking downwards and has three viewing options. You can view
only shelf items, only peg items, or both in the top view.
Normally, the plan is shown starting at the top of the plan and looking downwards. You can
change this by selecting a shelf. When this is done, the top view will start with the selected shelf
and the shelves and items above it will not be shown. In this manner, you can decide which shelf
or shelves should be seen. If a product has a photo top image, it will be displayed.
Top View Options
Menu:
View/Views/Top View Options
This menu options lets you select what will be displayed when the Top View is selected to
display a plan. The Top View Options lets you show shelf item, peg items or both. Just select
which to display from the Top View Options menu. The peg and shelf items options can be
turned on or off from here.
224