1
Download ATLAS 550 System Manual
Transcript
ATLAS 550 System Manual Section 4, User Interface Guide TX METHOD Write security: 3; Read security: 5 This field displays a list of the methods that we will allow the peer to authenticate us with. This is of use when a peer wants to do PAP just to get your password. None is selected when you do not want to be authenticated by the peer. PAP, CHAP, or EAP is selected when you will let the peer use one or all of the authentication protocols. CHAP or EAP is selected when you will let the peer use only one of the encrypted authentication protocols. EAP is selected when you will let the peer use only the EAP authentication protocol. TX USERNAME Write security: 3; Read security: 5 The username that the peer will use to authenticate the ATLAS 550. TX PASSWORD Write security: 3; Read security: 5 The password that the peer will use to authenticate the ATLAS 550. DEBUG LOG Write security: 3; Read security: 5 The following events can be viewed in the event log when PPP events have been turned to INFO. LCP DEBUGGING Write security: 3; Read security: 5 This turns on LCP negotiation debugging. IPCP DEBUGGING Write security: 3; Read security: 5 This turns on IPCP negotiation debugging. BCP DEBUGGING Write security: 3; Read security: 5 This turns on BCP negotiation debugging. AUTHENTICATION DEBUGGING Write security: 3; Read security: 5 This turns on authentication debugging. UNKNOWN PROTOCOL DEBUGGING Write security: 3; Read security: 5 This turns on debugging for all unknown protocols received on this link. 61200305L1-1F © 2002 ADTRAN, Inc. 199
