Download Herramientas de medición láser Equipos de precisión

Herramientas de medición láser
Equipos de precisión
Instrumentos de medición ambiental
2
www.geo-fennel.de
gEo-FENNEL – QuaLity aNd SErvicE
Benchmark for measuring.
Laser measuring tools and surveying equipment from geo-FENNEL.
GEo-FENNEL – QuaLity aNd SErvicE
3
Quality that is
measurable.
Enhanced by our commitment to service and support.
4
www.geo-fennel.de
Indice
Capítulo
1
Láser de Cruz
2
Lásers de rotación
3
Accesorios para
proyectores y niveles láser
4
Producto
Punto láser
Láser de punto y línea
láser de cruz
Láser combinado de línea y rota ción
Láser de cruz para exterior
Láser de cruz
Láser manual horiz ontal y vertical
Láser horizontal
Láser horizontal y vertical
Láser horizontal y vertical de pendientes
Láser de pendientes horizontal
Resumen
Lásers de posición
Láser de tuberías
pag
14
15
16
22
24
25
28
29
31
38
42
43
44
Columna suelo - techo
Soporte pared - techo
Soporte de inclinación
Receptores para láser de rotación
Receptores para laser de líneas
Receptores para maquinaria
48
Teodolitos
Teodolitos electrónicos
Niveles automáticos
54
55
56
Video Borescopes
Termómetros de infrarrojos
Instrumentos para medir temperatura
Medidor de humedad y temperatura
Medidores de humedad
Termómetros - anemómetros
Sonómetros
Multimeter
Accesorios
60
62
64
65
66
67
68
68
69
49
50
50
51
Equipos para topografía
5
Equipos de medición
ambiental
6
Medidor de distancias láser
Medidor electrónico de inclinaciones
Medidor de ángulos
Medidor digital de planos
72
74
76
77
Equipos de medición
electróncia
7
Trípodes
Trípodes de columna
Miras telescópicas
Ruedas de medir
Sprays para marcar
Radio teléfonos
Cintas métricas
Jalones
Jalones porta prisma
Bases nivelantes.
Niveles de escuadra
Accesorios
80
81
82
83
83
84
85
86
87
88
89
90
Application
FL 1000
tradEs aNd tasKs
· Transfer of points from floor to
ceiling in numerous applications:
electrical, plumbing, heating,
shop fitting, decorating,
renovation, interior design,
dry mortarless construction,
carpentry, timber frame
construction
duo-Pointer
Self levelling laser plummet - replaces the traditional
way of plumbing from floor to ceiling.
FEaturEs
·
·
·
·
·
·
·
·
Laser plummet up/down
Self-levelling
Robust housing
Visual and audible alarm when
out of level
Transport lock
Built-in magnets
1/4“-thread for camera tripod
Dust/water protection
tradEs aNd tasKs
· Electrical: planning, layout for
fixtures and fittings
· Shop fitting: shelves, floors
· Dry mortarless construction:
aligning tracks and profiles
tEcHNicaL data
Self-levelling range
Accuracy
Working range
Laser diode/Laser class
Power supply
Operating time
Temperature range
Dust/water protection
Weight (instrument only)
suppLiEd WitH
± 5°
± 2 mm/10 m
30 m
635 nm/2
3 x AA Alkaline
15 h
-10 °C – +45 °C
IP 54
0,6 kg
Magnetic target, padded bag,
set of batteries
art.-No.
575000
Multi-Pointer
5 self-levelling laser beams at right-angles to each other:
up, down, left, right and forward. Plumb, level, square and
align simultaneously – it couldn’t be easier.
FEaturEs
· Easy operation
· Out-of-level alarm
· Multi-functional mount to
attach the instrument to
- floor and wall
- wall frames
- pipes
- tripod (5/8“ and 1/4“)
· Transport lock
· Robust housing
· Dust and water resistant
tEcHNicaL data
Accuracy
Working range
Self-levelling range
Laser diode/Laser class
Tripod mount
Size
Weight (instrument only)
Power supply
Temperature range
suppLiEd WitH
± 2 mm/ 10 m
30 m
± 3° – 5°
650 nm / 2
5/8“ + 1/4“
80 x 98 x 101,6 mm
0,74 kg
3 x AA Alkaline
-10 °C – +40 °C
Multi-functional mount, magnetic
target, strap attachment, batteries,
hard case
art.-No.
555000
7
PoiNt aNd LiNE LaSEr
torpedo
1
tradEs aNd tasKs
· Interior works: transferring
levels, alignments
· Tiles: floor, wall
· Plumbing, heating: cables,
pipes, radiators
The universal laser spirit level that incorporates a beam
splitter to generate a laser dot or a laser line.
FEaturEs
· Switchable laser point or
laser line
· Stepless rotation of laser
line plus 90° lock intervals
· 45°, 90° & 180° vials
· Magnetic base
· 1/4” thread for tripod
tEcHNicaL data
Accuracy
Working range
Visible laser diodes
Laser class
Power supply
Operating time
Temperature range
suppLiEd WitH
± 3 mm / 10 m
max. 30 m*
1 x 635 nm
2
2 x 1,5 V AAA Alkaline
30 h
0 °C – +40 °C
* depending on room illumination
Batteries, case
art.-No.
560000
Square Liner II
tradEs aNd tasKs
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets
· Tiling: floor, wall
· Decorating: wall covering,
borders
· Renovation: cupboards, shelves
· Interior design: pictures,
curtains, lighting
· Carpenter: shelves, cut edges
· Interior works
The angle template generates two laser lines at 90°
to each other. Ideal for use on floor and all tiling!
FEaturEs
tEcHNicaL data
Accuracy
Working range
Visible laser diodes
Laser class
Power supply
Operating time
Temperature range
* depending on room illumination
8
www.geo-fennel.de
suppLiEd WitH
± 3 mm / 10 m
max. 30 m*
2 x 635 nm
2M
2 x 1,5 V AA Alkaline
48 h
0 °C – +40 °C
Batteries, magnetic target, case
art.-No.
551000
· Projects 2 laser lines at 90° to
each other (right angle)
· Fine and clear visible laser lines
· 0° to 90° graduation for setting
out 90°, 45° or any required
angles to floor, wall or ceiling
· Built-in circular and tubular
vials for horizontal and vertical
alignment
· Electrical: conduit, trunking,
switches, sockets
· Tiles: wall
· Plumbing, heating: cables,
pipes, radiators
· Shop fitting and kitchen construction: shelves, cupboards,
floors
· Decorating: wall covering,
borders
· Renovation: cupboards, shelves
FL 40-Pocket II
Robust and handy laser cross level.
Horizontal and vertical levelling and aligning.
suppLiEd WitH
Multi-functional mount, set
of batteries, magnetic target,
padded carrying bag
541000
art.-No.
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection,
measurement
OptiONaL
Receiver FR 55 / FR 55-M
FEaturEs
art.-No. Fr 55
art.-No. Fr 55-M
· Laser cross
· Detachable multi-functional
mount
· Base and side magnets
· Visual and audible alarm when
out of level
· Thread on instrument and mount
(5/8” and 1/4”)
· Locking device for safe
transport
· Pulse function for use with
receiver FR 55/FR 55-M
(optional) to extend the working
range up to 30 m
FL 40-Pocket I I HP
suppLiEd WitH
Multi-functional mount, set
of batteries, magnetic target,
padded carrying bag
art.-No.
High-power-Version.
High specification diodes for optimum visibility of laser lines.
541100
OptiONaL
Receiver FR 55 / FR 55-M
art.-No. Fr 55
art.-No. Fr 55-M
500510
500520
tEcHNicaL data
Self-levelling range (left/ right)
Accuracy
Working range without receiver
Working range with receiver
Operating time
Power supply
Laser diodes/Laser class
Weight
* depending on room illumination
10
www.geo-fennel.de
FL 40-pocket ii
± 4°
± 3 mm /10 m
10 m*
30 m
48 h
3 x 1,5 V AA Alkaline
635 nm/2M
0,8 kg
FL 40-pocket ii Hp
± 4°
± 3 mm /10 m
20 m*
30 m
48 h
3 x 1,5 V AA Alkaline
635 nm/3R
0,8 kg
500510
500520
croSS LaSEr
1
tradEs aNd tasKs
FL 40-3Liner
the Best-seller.
The ideal measuring tool for interior works! Versatile and efficient. The laser
line at 90° is ideally suitable for floor covering tasks (carpet, wood, hard
tiles) as well as for wall tiles. Can be used on the floor as the laser lines start
directly from the instrument.
suppLiEd WitH
Wall/tripod mount, set of
batteries, magnetic target,
laser intensive glasses, padded
carrying case
art.-No.
530000
OptiONaL
Receiver FR 55 / FR 55-M
art.-No. Fr 55
art.-No. Fr 55-M
500510
500510
500520
500520
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets
· Tiles: floor, wall
· Plumbing, heating: cables,
pipes, radiators
· Air conditioning: raised floor
for air conditioning
· Shop fitting and kitchen
construction: shelves,
cupboards, floors
· Decorating: wall covering,
borders
· Exhibitions design and
construction: panels,
partitions, construction
· Renovation: cupboards, shelves
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection,
measurement
· Carpenter: shelves, cut edges
· Dry mortarless construction:
aligning tracks and profiles,
suspended ceilings
FEaturEs
· Laser cross
· Vertical laser line at 90° to
laser cross
· 3 visible laser lines
· Magnetic damping
· Locking device for safe
transport
· Visual and audible alarm when
out of level
· Pulse function for use with
receiver FR 55/FR 55-M
(optional) to extend the
working range up to 30 m
FL 40-3Liner HP
suppLiEd WitH
Wall/tripod mount, set of
batteries, magnetic target,
laser intensive glasses, padded
carrying case
Versión alta potencia!
High specification diodes for optimum visibility of laser lines.
art.-No.
530100
OptiONaL
Receiver FR 55 / FR 55-M
tEcHNicaL data
FL 40-3LiNEr
FL 40-3LiNEr Hp
Self-levelling range
Accuracy
Working range without receiver
Working range with receiver
Operating time
Power supply
Laser diodes/Laser class
Weight
± 3,5°
± 3 mm /10 m
10 m*
30 m
15 h
3 x 1,5 V AA Alkaline
635 nm/2M
0,86 kg
± 3,5°
± 3 mm /10 m
20 m*
30 m
15 h
3 x 1,5 V AA Alkaline
635 nm/3R
0,86 kg
art.-No. Fr 55
art.-No. Fr 55-M
500510
500520
* depending on room illumination
11
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets
· Tiles: floor, wall
· Plumbing, heating: cables,
pipes, radiators
· Air conditioning: raised floor for
air conditioning
· Shop fitting and kitchen
construction: shelves,
cupboards, floors
· Decorating: wall covering,
borders
· Exhibitions design and
construction: panels, partitions,
construction
· Renovation: cupboards, shelves
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection,
measurement
· Carpenter: shelves, cut edges
· Dry mortarless construction:
aligning tracks and profiles,
suspended ceilings
FL 40-4Liner
the starter model for professionals!
Using the latest laser diode technology to ensure optimum line visibility.
3 laser crosses at 90° to each other connected by a horizontal laser line.
FEaturEs
· 1 horizontal and 3 vertical laser
lines
· Shut-off of self-levelling
function for manual use (slope)
· Locking device for safe
transport
· Magnetic connection from
instrument to wall mount
· Centering adapter for optimum
positioning over a floor point
· Visual and audible alarm when
out of level
· Pulse function for use with
receiver FR 55/FR 55-M
(optional) to extend the
working range up to 30 m
Centring adapter
suppLiEd WitH
Wall/tripod mount with 5/8”
thread, set of batteries, magnetic
target, laser intensive glasses,
padded carrying case
tEcHNicaL data
Self-levelling range
Accuracy
Working range without receiver
Working range with receiver
Operating time
Power supply
Visible laser diodes
Laser class
Weight
* depending on room illumination
12
www.geo-fennel.de
± 3,5°
± 3 mm /10 m
20 m*
30 m
12 h
3 x 1,5 V AA Alkaline
4 x 635 nm
3R
1,0 kg
art.-No.
520000
OptiONaL
Receiver FR 55 / FR 55-M
art.-No. Fr 55
art.-No. Fr 55-M
500510
500520
croSS LaSEr
FL 45 HP
1
tradEs aNd tasKs
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets
· Tiles: floor, wall
· Plumbing, heating: cables, pipes,
radiators
· Air conditioning: raised floor for
air conditioning
· Shop fitting and kitchen
construction: shelves, cupboards,
floors
· Decorating: wall covering,
borders
· Exhibitions design and construction: panels, partitions, construction
· Renovation: cupboards, shelves
· Interior design: pictures, curtains,
lighting
· Surveyor: inspection, measurement
· Carpenter: shelves, cut edges
· Dry mortarless construction:
aligning tracks and profiles,
suspended ceilings
the versatile.
For numerous indoor applications. Two laser crosses at 90° to each other.
Laser cross to the ceiling. Plumb down beam to the floor.
Centring adapter
FEaturEs
∙ 2 laser crosses at 90° to each
other
∙ Laser cross to the ceiling
∙ Plumb down beam
∙ Transport lock
∙ Wall / tripod mount magnetically
fixed to the instrument
∙ Wall / tripod mount with centring
adapter for optimum positioning
over a floor point
∙ Mini tripod
∙ Visual and audible alarm when out
of level
· Pulse function for use with
receiver FR 55/FR 55-M
(optional) to extend the
working range up to 30 m
tEcHNicaL data
Self-levelling range
Accuracy
Laser diode/Laser class
Working range without receiver
Working range with receiver
Temperature range
Operating time
Size
Weight
Dust/water protection
Power supply
* depending on room illumination
suppLiEd WitH
± 3°
± 3 mm/10 m
635 nm/3R
20 m*
30 m
-10 °C to +45 °C
12 h
90 x 90 x 146 mm
1 kg
IP 54
3 x AA Alkaline
Padded carrying case, set of batteries, floor / wall mount, mini tripod,
magnetic target, laser glasses
art.-No.
520510
OptiONaL
Receiver FR 55 / FR 55-M
art.-No. Fr 55
art.-No. Fr 55-M
500510
500520
13
1
croSS LaSEr
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets, planning,
layout and fixtures for fittings
· Tiles: floor, wall
· Windows/doors: windows,
doors, frames and fittings
· Plumbing, heating: cables,
pipes, radiators
· Air conditioning: raised floor
for air conditioning
· Shop fitting and kitchen
construction: shelves,
cupboards, floors
· Decorating: wall covering,
borders
· Exhibitions design and
construction: panels, partitions,
construction
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection,
measurement
· Carpenter: shelves, cut edges
· Dry mortarless construction:
aligning tracks and profiles,
dry mortarless stone walls,
suspended ceilings
Multi-Liner
FL 55 PLuS
With receiver Fr 55
Universal, robust, versatile, accurate - the ultimate tool for the professional!
The latest laser diode technology to ensure optimum line visibility. High
accuracy, dust/water protection as well as many other important features
for professional use.
FEaturEs
· Dust/water protection to IP 54
· Rubberized housing
· 4 laser crosses at 90° to
each other
· Laser cross to the ceiling
· Plumb down beam to the floor
· Self-levelling function can be
switched off for manual use
· Use with receiver FR 55
(standard outfit) to extend
working range up to 40 m
· Use with floor tripod (standard
outfit)
· Use with builder’s tripod
(optional)
· Adjustable 360° circle with slow
motion screw for perfect
alignment
· Audible and visible alarm
when out of level
· Transport lock
tEcHNicaL data
Self-levelling range
Accuracy
with adjusted vial
Working range without receiver
Working range with receiver
Operating time
Power supply
Charger can be used as a power supply
Visible laser diodes
Laser class
Weight
± 3,5°
± 3 mm /10 m
± 2 mm/10 m
20 m*
40 m
12 h
NiMH
Alkaline batteries (optional)
yes
6 x 635 nm
3R
1,6 kg
* depending on room illumination
suppLiEd WitH
receiver Fr 55
Receiver FR 55 with clamp, floor
tripod, magnetic target, laser
intensive glasses, set of batteries,
charger, battery case for alkaline
batteries, container
Indication
Accuracy
Tones
LCD plus front, side and top LEDs
for easy reading
± 1 mm
3
art.-No.
500550
1
croSS LaSEr
tradEs aNd tasKs
tradEs aNd tasKs
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets, planning,
layout for fixtures and fittings
· Tiles: floor, wall
· Windows/doors: windows,
frames, fittings
· Plumbing, heating: cables,
pipes, radiators
· Air conditioning: raised floor for
air conditioning
· Shop fitting and kitchen
construction: shelves, cupboards, floors
· Decorating: wall covering,
borders
· Exhibition design and
construction: panels, partitions,
construction
· Interior design: pictures, curtains, lighting
· Surveyor: inspection, measurement
· Carpenter: shelves, cut edges
· Dry mortarless construction:
aligning tracks and profiles,
dry mortarless stone walls,
suspended ceilings
Maxi-Liner
FL 65
With receiver Fr 55
Projects four vertical lines at 90° to each other and two 130°
horizontal lines crossing all four vertical lines. Easily tackles
all tasks in interior construction.
FEaturEs
· Dust/water protection IP 54
· 5 laser crosses
· 4 vertical lines at 90° to each other
· 2 horizontal lines
· Laser cross to the ceiling
· Plumb down beam
· Self-levelling function can be
switched off for manual use e.g.
setting-out slopes
· Use with receiver FR 55 (standard
outfit) to extend working range up
to 40 m
· Adjustable 360° circle
· Slow motion screw
· Transport lock
· Audible and visible alarm when out
of level
· Integrated floor tripod
· 5/8“ thread for standard tripod
tEcHNicaL data
Self-levelling range
Accuracy
Working range without receiver
Working range with receiver
Laser diodes/Laser class
Power supply
Charger can be used as power supply
Temperature range
Weight (instrument only)
± 5°
± 2 mm/10 m
20 m
40 m
635 nm/3R
NiMH
Alkaline batteries (optional)
yes
-10 °C – +45 °C
1,45 kg
receiver Fr 55
Indication
Accuracy
Tones
LCD plus front, side and top LEDs
for easy reading
± 1 mm
3
suppLiEd WitH
Receiver FR 55 with clamp, floor
tripod, magnetic target, laser
glasses, batteries and charger,
battery case for alkaline batteries,
container
art.-No.
581000
581000
1
coMBiNEd rotatiNg aNd LiNE LaSEr
tradEs aNd tasKs
· Electrical: conduit, trunking,
switches, sockets, planning,
layout for fixtures and fittings
· Floor laying: height
construction and control
· Prefabricated construction:
alignment, measurement, control
· Tiles: floor, wall
· Windows/doors: windows,
frames and fittings
· Plumbing, heating: cables, pipes,
radiators
· Air conditioning: raised floor
for air conditioning
· Shop fitting and kitchen
construction: shelves,
cupboards, floors
· Exhibitions design and
construction: panels, partitions,
construction
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection,
measurement
· Carpenter: shelves, cupboards
· Dry mortarless construction:
suspended ceilings, stud wall
construction
· Boat building: interior works
FEaturEs
· Electronic self-levelling
· Horizontal visible rotating
laser beam
· 4 vertical laser lines at 90° to
each other
· Laser cross to the ceiling
· Plumb down beam
· Tilt-function, slope setting
· Combi-receiver for rotating
and line beams
· Remote control
· Adjustable 360° circle
· Slow motion screw
· Automatic shut-off/audible
alarm when out of level
· Integrated floor tripod
5/8“ thread for builders’ tripod
FL 1000
state-of-the-art.
A new generation of multi-functional laser that redefines innovation. All the
jobs you did in the past with two or three instruments can now be performed with the FL 1000. Designed to be simple to use, even complex surveying tasks can be achieved efficiently and cost effectively.
FL 1000 the ultimate tool for interior construction! Integrates all the advantages of line lasers and rotating lasers into one instrument. A two speed
rotating laser, four vertical lines at 90° to each other, laser cross to the
ceiling, plumb down beam to the floor, used as clearly visible line laser
or in pluse mode. With a 360° adjustable circle, the rotating laser has an
automatic TILT function, manual slope setting on two axes and a scanning
function.
Even for the most complicated and specialised applications. The whole laser plane can, for example, be tilted manually if the object to be measured
does not stand level – such as in the interior construction of ships.
The FR 10 receiver allows you to detect either the rotating beam or the
laser lines (in normal or pulse mode) with the one device. Remote control function can be switched off which avoids disturbances through other
remote controls.
convinc
1
ng all down the line.
tEcHNicaL data
Self-levelling range
Power supply
Operating time
Charger = power supply
Laser diode/Laser class
Temperature range
Weight
Dust/water protection
rotating laser
Accuracy
Gradual slope setting in X and Y axis
TILT-function
Working range without receiver Ø
Working range with receiver Ø
Scanning without receiver
Scanning range
Rotating speed rpm
Line laser
Accuracy
Working range without receiver
Working range with receiver
* depending on room illumination
± 5°
NiMH/Alkaline
10 h
yes
635 nm/3R
-10 °C – +40 °C
2,85 kg
IP 54
± 1 mm /10 m
± 5° (± 9%)
yes
40 m*
200 m
35 m*
10/30/60°
200, 500
± 2 mm/10 m
20 m*
60 m
suppLiEd WitH
Combi-receiver FR 10, rechargeable
batteries, power supply, magnetic
target, laser intensive glasses,
remote control, hard case
art.-No.
585000
1
croSS LaSEr / outLiNE
tradEs aNd tasKs
· Electrical: conduit, trunking,
switches, sockets
· Tiles: wall
· Plumbing, heating: pipes,
radiators
· Shop fitting and kitchen
construction: shelves,
cupboards, floors
· Decorating: wall covering,
borders
· Renovation: cupboards, shelves
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection,
mesasurement
FLg 40-green
A bright clear laser cross is generated by green laser
diodes for improved visibility under difficult conditions.
Ideal for working in bright surroundings.
FEaturEs
· Green laser cross
· Fully automatic self-levelling
· Locking device for safe
transport
· Visual and audible alarm when
out of level
· 360° base
· Self-levelling function can be
switched off for manual use
· Detachable multi-functional
mount
· Base and side magnets
· Thread on instrument and
mount (5/8” and 1/4”)
tEcHNicaL data
Self-levelling range
Accuracy
Working range
Temperature range
Power supply
Operating time rechargeable batteries
Charger = power supply
Laser diode/Laser class
Laser output power
Weight
± 3,5 °
± 3 mm /10 m
20 m
0 °C – +40 °C
NiMH
8h
yes
532 nm/3R
< 5mW
1,1 kg
suppLiEd WitH
Multi-functional mount, rechargeable battery, charger, target,
laser glasses, hard case
art.-No.
543000
SuMMary
croSS LaSErS
FL 40-Pocket II
FL 40-Pocket II - HP
FLG 40-Green
FL 40-3Liner
FL 40-3Liner - HP
FL 40-4Liner
FL 45 - HP
FLG 55-Green
FL 55 PLUS
FL 65
FL 1000-Line laser
FL 1000-Rotating laser
1
1
1
2
2
3
2
2
3
4
4
-
1
1
1
1
1
1
1
1
1
2 x 130°
360°
yes
yes
yes
yes
yes
-
±3
±3
±3
±3
±3
±3
±3
±2
±2
±2
±2
±1
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
IP 54
IP 54
IP 54
IP 54
IP 54
IP 54
optional
optional
optional
optional
optional
optional
included
included
included
included
10 m
20 m
20 m
10 m
20 m
20 m
20 m
20 m
20 m
20 m
20 m
20 m
30 m
30 m
30 m
30 m
30 m
30 m
40 m
40 m
60 m
100 m
Alkaline
Alkaline
Alkaline
Alkaline
Alkaline
Alkaline
Alkaline
Li-Ion
NiMH
NiMH
NiMH
NiMH
16
16
24
17
17
18
19
25
20
21
22 and 23
22 and 23
croSS LaSEr
FLg 55-green
1
tradEs aNd tasKs
· Floor covering: carpet, wood,
hard tiles
· Electrical: conduit, trunking,
switches, sockets, planning
layout, fixtures and fittings
· Tiles: floor, wall
· Windows/doors: windows, door
frames and fittings
· Plumbing, heating: cables,
pipes, radiators
· Air conditioning: raised floor for
air conditioning
· Shop fitting and kitchen
construction: shelves, cupboards, floors
· Decorating: wall covering,
borders
· Exhibition design and
construction: panels, partitions,
construction
· Interior design: pictures,
curtains, lighting
· Surveyor: inspection, measurement
· Carpenter: shelves, cut edges
· Dry mortarless construction:
aligning tracks and profiles, dry
mortarless stone walls,
suspended ceilings
Bright clear laser lines are generated by green laser diodes for
improved visibility under difficult lighting conditions. Ideal for
working in bright surroundings.
FEaturEs
· Self-levelling
· 2 laser crosses at 90° to each
other
· Laser cross to the ceiling
· Plumb down beam
· Self-levelling function can be
switched off for manual use
e.g. setting-out slopes
· Transport lock
· Audible and visible alarm when
out of level
· Magnetic connection of instrument to wall/tripod mount
· Wall/tripod mount with centring
adapter for optimum
positioning over a floor point
· Mini tripod
· 5/8“ connection for use with
standard tripod
tEcHNicaL data
Self-levelling range
Accuracy
Working range
Laser diode/Laser class
Power supply
Operating time
Charger can be used as power supply
Temperature range
Dust/water protection
Weight (instrument only)
suppLiEd WitH
± 5°
± 2 mm/10 m
20 m
532/3R
Li-Ion
5h
Alkaline batteries (optional)
yes
0 °C – +40 °C
IP 54
1,05 kg
Wall/tripod mount, mini tripod,
magnetic target, laser glasses,
batteries and charger, battery case
for alkaline batteries, container
art.-No.
500100
Application
FL 500Hv-g
rotatiNg LaSErS
2
2
MaNuaL HoriZoNtaL aNd vErticaL LaSEr
tradEs aNd tasKs
· Electrical: conduit, trunking,
switches, sockets
· Floor laying: height
construction and control
· Tiles: wall
· Windows/doors: windows,
frames and fittings
· Landscape gardening and
architecture: posts, fences,
beams, structures
· Plumbing, heating: cables, pipes,
radiators
· Interior design: pictures,
curtains, lighting
· Painting and decorating: wall
covering, borders
· Interior works: levelling
FL 30
For horizontal and vertical use.
A robust manual laser quick to set-up and easy to operate. Easy set-up with two bubbles. For horizontal and vertical
measurements. Scanning, laser point mode and permanent 90° beam to zenith. The ideal laser for indoor applications, suitable for simple outdoor jobs.
FEaturEs
· For horizontal and vertical
measurements
· Visible laser beam
· Horizontal easy setting with
2 bubbles
· Scanning function (2 step) and
laser point mode
· Multi-stage rotating beam
· Permanent 90° beam to zenith
suppLiEd WitH
Padded carrying case, floor/tripod
mount, set of batteries
art.-No.
271000
FL 30 SEt
FL 30 with all the necessary accessories to start working immediately!
Consists of: Elevating tripod, wall mount, magnetic target, laser glasses for better visibility of the laser beam, 2,45 m
levelling staff and a receiver that all fit neatly into the handy carrying case.
tEcHNicaL data
Accuracy
Working range without receiver Ø
Working range with receiver Ø
Rotating speed
Laser diodes/Laser class
Scan angle
Temperature range
Dust/water protection
Dimensions w/o mount
Weight
Power supply
* depending on room illumination
8
www.geo-fennel.de
suppLiEd WitH
± 2 mm/10 m
15 m*
120 m
150 – 300 rpm adjustable
635 nm/2
0°, 5°, 10°
-10 °C – +45 °C
IP 54
90 x 90 x 120 mm
0,74 kg
4 x AA Alkaline
Container, floor/tripod mount, set
of batteries, 2,45 m levelling staff,
elevating tripod with max. height
of 1,58 m, receiver with clamp, magnetic target, laser glasses, height
adjustable wall mount
art.-No.
271500
HoriZoNtaL LaSEr
tradEs aNd tasKs
· Excavation: surface/grade
measurement and control
· Floor laying: height
construction and control
· Ground works: sports fields,
car parks
· Landscape gardening and
architecture: garden, paving,
paths
· Building: foundations and
concrete flooring, cutting checks
· Civil engineering: trench/
footings depth control,
groundwork and concrete
flooring
FL 110Ha
the standard for horizontal laser levels!
The FL 110HA is a real professional in its business: Compact and robust with
a rubberized housing and metal cover for effective site protection. Easy and
intuitive operation.
High performance: Li-Ion technology for continuous operation, V-W-S function (vibration-wind-security), automatic TILT function, zonal control, large
working range, high accuracy, the FL 110HA does not lack anything.
FEaturEs
· Zonal control with electronic
beam screen avoids spurious
measurements caused by
crossing laser planes and
reflections - increases site safety
· Robust and dust/water protected
housing to IP 66, rubberized
protection and metal top
· Large working range and high
accuracy of ± 0,75 mm / 100 m
· Automatic shut-off when out of
self-levelling range
· Manual slope setting of X and Y
axes up to ± 5°
· 360° reception range of remote
control
· VWS-function
tEcHNicaL data
Self-levelling range
Accuracy
Working range with receiver FR 45 Ø
Working range with receiver FMR 700 Ø
Slope setting in X and Y axis
Rotating speed
Power supply/ Operating time
suppLiEd WitH
Receiver FR 45 with clamp, Li-Ion
rechargeable battery with charger,
battery case for alkaline batteries,
remote control, container
art.-No.
211000
Temperature range
Laser diode/Laser class
Weight
Dust/water protection
± 5°
± 0,75 mm /10 m
600 m
650 m
± 5° (9 %)
800 rpm
Li-Ion / 40 h
6 x AA Alkaline / 40 h
-10 °C – +45 °C
635 nm/2
2,1 kg
IP 66
9
HoriZoNtaL aNd vErticaL LaSEr
2
tradEs aNd tasKs
FL 210a and
FLg 210a-green
Horizontal and vertical lasers for interior and exterior applications. Two new models with improved self-levelling,
rotational accuracy and improved technical construction. Instant self-levelling makes these lasers ideal when
applications necessitate frequent positional changes.
∙
∙
∙
∙
∙
∙
New innovative design ensures instant self-levelling with improved stability
Increased horizontal accuracy
Floor / wall mount integrated into housing
Detachable battery compartment can be charged separately
Intelligent battery charger
Improved operational safety: Rotation only possible when compensator is unlocked
∙ Electrical: conduit, trunking,
switches, sockets, planning,
layout for fixtures and fittings
· Floor laying: height construction
and control
· Tiles: floor, wall
· Windows/doors: windows,
frames and fittings
· Landscape gardening and architecture: garden, paving, paths,
post, fences, beams, structures,
balustrade, handrails, edging
· Plumbing, heating: cables, pipes,
radiators
· Building: foundations and
concrete flooring, cutting checks,
masonry, walls
· Air conditioning: raised floor
for air conditioning
· Shop fitting and kitchen construction: shelves, cupboards, floors
· Exhibitions design and construction: panels, partitions, construction
· Interior design: pictures, curtains,
lighting
· Surveyor: inspection, measurement
· Decorating: wall covering, borders
· Dry mortarless construction:
aligning tracks and profiles, dry
mortarless stone walls,
suspended ceilings
FEaturEs
A highly visible laser beam, scanning functions, permanent 90° beam to zenith, automatic shut-off when misaligned
and a comprehensive set of accessories make these models ideal for the all-rounder.
FLg 210a-green
Self-levelling rotating laser for interior horizontal and vertical applications. Similar functions to the FL 210A but
incorporating a green laser diode for improved visibility under difficult measuring conditions such as bright
surroundings and long distances. New: now includes receiver FRG 45-Green.
∙ Instant self-levelling
∙ Horizontal self-levelling with
automatic shut-off and audible
alarm when out of tolerance
∙ Easy vertical set-up with one foot
screw
∙ Variable rotating speed
∙ Scanning and laser dot mode
∙ Permanent 90° beam to zenith
∙ NiMH batteries
∙ Can be used with alkaline
batteries
∙ Dust/water protection IP 66
tEcHNicaL data
FL 210a
FLg 210a-grEEN
suppLiEd WitH FL 210a
Self-levelling range
Accuracy horizontal
Accuracy vertical
Working range with receiver Ø
Rotating speed
Laser diodes/Laser class
Scan angle
Temperature range
Dust/water protection
Dimensions
Weight (instrument only)
Power supply
± 3,5°
± 1 mm/10 m
± 1,5 mm/10 m
400 m
150, 200, 250, 300 rpm
635 nm/2
0°, 20°, 40°
-10 °C – +45 °C
IP 66
180 x 162 x 202 mm
2,8 kg
4 x C NiMH*
± 3,5°
± 1 mm/10 m
± 1,5 mm/10 m
400 m
150, 200, 250, 300 rpm
532 nm/3R
0°, 20°, 40°
0 °C – +40 °C
IP 66
180 x 162 x 202 mm
2,8 kg
4 x C NiMH*
Receiver FR 45 with clamp, remote
control, rechargeable batteries/
charger, floor/wall mount, magnetic
target, laser glasses, carrying case
* with 6,4 V intelligent charger, battery can be charged externally, alkaline batteries can be used alternatively
art.-No.
suppLiEd WitH FLg 210a-grEEN
Remote control, rechargeable batteries/charger, floor/wall mount
magnetic target, laser glasses, carrying case, receiver FRG 45-Green
with clamp
art.-No.
10
www.geo-fennel.de
291500
291700
2
HoriZoNtaL aNd vErticaL LaSEr
FEaturEs
∙
∙
∙
∙
∙
∙
∙
∙
∙
Visible laser beam
2 rotating speeds
Variable scanning mode
Laser point mode
Slope setting up to ± 5° (± 9%)
in X and Y axis
Permanent 90° plumb beam
TILT function
Remote control screen (on/off)
Closed top cover housing offers
excellent protection against
dust and water
FL 240Hv
Multi-functional rotating laser - ideal for numerous applications!
Versatile and easy to use. Fully automatic self-levelling in horizontal and vertical. A feature packed laser designed
for the interior professional with a dust and water protection making it also suitable for outdoor use. Variable scanning and laser point mode for optimum beam visibility.
tradEs aNd tasKs
∙ Electrical: conduit, trunking,
switches, sockets, planning,
layout for fixture and fittings
∙ Floor laying: height
construction and control
∙ Prefabricated construction:
alignment, measurement, control
∙ Tiles: floor, wall
∙ Windows/doors: windows,
frames and fittings
∙ Landscape gardening and
architecture: garden, paving,
paths, fences, beams, edging
∙ Plumbing, heating: cables, pipes,
radiators
∙ Air conditioning: raised floor for
air conditioning
∙ Shop fitting and kitchen
construction: shelves, cupboards,
floors
∙ Exhibitions design and
construction: panels, partitions,
construction
∙ Building: foundations, concrete
flooring, masonry, walls,
cutting checks
∙ Civil engineering: groundwork,
concrete flooring, control of
profiles
∙ Dry mortarless construction:
suspended ceilings,
stud wall construction
Basic sEt
OptiONaL
cOMpLEtE sEt
Remote control, alkaline batteries,
adjustable wall and ceiling mount,
laser glasses, magnetic target,
container
Rechargeable battery (NiMH),
intelligent charger
Receiver FR 45 with clamp, remote
control, rechargeable battery
(NiMH), intelligent charger, battery
case for alkaline batteries,
adjustable wall and ceiling mount,
laser glasses, magnetic target,
container
art.-No.
250100
OptiONaL
Receiver FR 45 with clamp
art.-No.
12
www.geo-fennel.de
244100
art.-No.
252000
art.-No.
244000
HoriZoNtaL aNd vErticaL LaSEr
2
cOMpLEtE sEt
Receiver FRG 45 with clamp,
remote control, rechargeable
battery (NiMH), intelligent charger,
battery case for alkaline batteries,
adjustable wall and ceiling mount,
laser glasses green, magnetic
target green, container
FLg 240Hv-green
Horizontal and vertical laser for interior applications. Similar functions to the FL 240HV but incorporating a green
laser diode for improved visibility under difficult measuring conditions such as bright surroundings and long
distances.
art.-No.
244500
Basic sEt
tEcHNicaL data
FL 240HV
FLg 240HV-grEEN
Self-levelling range
Accuracy horizontal
Accuracy vertical
Working range with receiver Ø
Scanning w/o receiver
Rotating w/o receiver Ø
Scanning modes
Slope setting in X and Y axis
Rotating speed rpm
Operating time/Power supply
± 5°
± 1 mm/10 m
± 1,5 mm/10 m
500 m
30 m*
40 m*
2x
± 5° (± 9 %)
200, 500
24 h (NiMH)
40 h (Alkaline)
-10 °C – +45 °C
635 nm/3R
IP 54
1,95 kg
± 5°
± 1 mm/10 m
± 1,5 mm/10 m
400 m
40 m*
50 m*
2x
± 5° (± 9%)
200, 500
24 h (NiMH)
40 h (Alkaline)
0 °C– +40 °C
532 nm/3R
IP 54
1,95 kg
Temperature range
Laser diode/Laser class
Dust/water protection
Weight (instrument only)
* depending on room illumination
Remote control, alkaline batteries,
adjustable wall and ceiling mount,
laser glasses green, magnetic
target green, container
art.-No.
244600
OptiONaL
Rechargeable battery (NiMH),
intelligent charger
art.-No.
250100
OptiONaL
Receiver FRG 45 with clamp
art.-No.
252300
13
2
HoriZoNtaL aNd vErticaL LaSEr
customised performance
in every situation.
tEcHNicaL data
Self-levelling range
Accuracy horizontal
vertical
Working range with receiver Ø
Not rotating without receiver
Scanning without receiver
Rotating without receiver Ø
Gradual slope setting X and X axis
Rotating speed rpm
Operating time
Power supply
Temperature range
Laser diode/Laser class
Dust/water protection
Weight
* depending on room illumination
suppLiEd WitH
± 5°
± 1 mm /10 m
± 1,5 mm /10 m
500 m
approx. 50 m*
approx. 30 m*
approx. 40 m*
± 5° (± 9%)
120, 500
24 h (NiMH)
48 h (Alkaline)
4 x C 1,5 NiMH
-20 °C – +50 °C
635 nm / 3R
IP 65
1,9 kg
Receiver FR 45 with clamp for
levelling staff, remote control, rechargeable batteries, charger, floor/
wall mount (integrated), magnetic
target, laser glasses and container
art.-No.
241000
2
HoriZoNtaL aNd vErticaL LaSEr
tradEs aNd tasKs
FL 250va-N
Horizontal and vertical, fully automatic self-levelling. Compact and robust.
Slope and scanning function. The ideal multi-functional laser for indoor and
outdoor use.
· Electrical: conduit, trunking,
switches, sockets, planning,
layout and fixtures for fittings
· Floor laying: height
construction and control
· Prefabricated construction:
alignment, measurement,
control
· Tiles: floor, wall
· Windows/doors: windows,
frames and fittings
· Landscape gardening and
architecture: garden, paving,
paths, posts, fences, beams,
structures, balustrade,
handrails, edging
· Warehouse construction: piling,
beams, facades
· Plumbing, heating: cables,
pipes, radiators
· Air conditioning: raised floor
for air conditioning
· Shop fitting and kitchen
construction: shelves,
cupboards, floors
· Exhibitions design and
construction: panels, partitions,
construction
· Building: foundations and
concrete flooring, masonry,
walls, cutting checks, prefabricated and Ferro concrete
construction, steel and
concrete piling
· Surveyor: inspection,
measurement
· Civil engineering: groundwork
and concrete flooring, control
of profiles
· Dry mortarless construction:
suspended ceilings, stud wall
construction
FEaturEs
· Visible laser beam
· Slope setting up to ± 5° in
X and Y axis
· Two rotating speeds
· Variable scanning mode
· Laser point mode
· Permanent 90° plumb beam
to ceiling
· TILT-function
· Use with NiMH rechargeable
battery (standard) or Alkaline
batteries
· Dust/water protection to IP 65
HoriZoNtaL aNd vErticaL LaSEr
tradEs aNd tasKs
· Electrical: conduit, trunking,
switches, sockets, planning,
layout and fixtures for fittings
· Floor laying: height construction
and control
· Prefabricated construction:
alignment, measurement, control
· Tiles: floor, wall
· Windows/doors: windows,
frames and fittings
· Landscape gardening and architecture: garden, paving, paths,
posts, fences, beams, structures,
balustrade, handrails, edging
· Warehouse construction: piling,
beams, facades
· Plumbing, heating: cables, pipes,
radiators
· Air conditioning: raised floor for
air conditioning
· Shop fitting and kitchen construction: shelves, cupboards, floors
· Exhibitions design and construction: panels, partitions, construction
· Building: foundations and concrete flooring, masonry, walls,
cutting checks, prefabricated and
Ferro concrete construction, steel
and concrete piling
· Surveyor: inspection, measurement
· Civil engineering: groundwork
and concrete flooring, control of
profiles
· Dry mortarless construction:
suspended ceilings, stud wall
construction
FEaturEs
· Visible laser beam
· Adjusted slope setting (manual)
up to ± 5° (± 9 %) in X and Y axis
· Single slope setting up to ± 5°
(± 9 %)
· 2 Rotating speeds
· Variable scanning and laser point
mode
· Permanent 90° beam to zenith
· V-W-S function combined with
TILT function
· Automatic TILT function
· Remote control screen
· NiMH batteries
· Can be used with alkaline
batteries
· Li-Ion battery technology
· Intelligent charger
· Dust/water protection IP 66
suppLiEd WitH
Receiver FR 45 with clamp, remote
control, rechargeable batteries/charger, floor mount, magnetic target,
laser glasses, carrying case
art.-No.
242000
FL 260va
Fully automatic horizontal and vertical laser. Compact ergonomic design and intuitive operation.
A multi-functional laser for interior and exterior applications.
∙ Improved technical design and accuracy
∙ Enhanced scanning functions with smaller steps and enlarged range
∙ Advanced slope setting functions:
∙ Horizontal:
∙ Manual slope setting in X and Y axis up to ± 5° (± 9 %)
∙ One axis (X or Y) manual slope, 2nd axis self-levelled
∙ Vertical:
∙ Manual slope setting in X and Z axis
∙ X axis manual slope, Y axis self-levelled
∙ V-W-S function (Vibration-Wind-Security) – rotation will not be stopped due to light ground and
wind vibrations (combined with TILT function)
∙ Remote control screen – remote control function can be switched off. Can be used to avoid
interference with other instruments on site.
∙ Li-Ion battery technology: 100 % power until fully discharged, no memory effect, no self-discharge,
top-up charging possible
∙ Intelligent charger
∙ Integrated floor mount with centring mark
2
2
HoriZoNtaL aNd vErticaL LaSEr
FLg 260va-green
Fully automatic horizontal and vertical laser for interior applications. Similar functions to the FL 260VA but incorporating a green laser diode for improved visibility under difficult measuring conditions such as bright surroundings
and long distances. New: now includes receiver FRG 45-Green.
tEcHNicaL data
FL 260Va
FLg 260Va-grEEN
Self-levelling range
Accuracy horizontal
Accuracy vertical
Working range with receiver Ø
Rotating speed
Laser diode/Laser class
Scan angle
Manual slope setting X and Y axis
Single slope
Temperature range
Dimensions
Weight
Dust/water protection
Power supply
5°
± 0,5 mm/10 m
± 1,0 mm/10 m
600 m
800, 300 rpm
635 nm/3R
0°, 10°, 45°, 90°, 180°
± 5° (± 9 %)
One axis tilted, other axis self-levelled
-10 °C – +45 °C
219 x 160 x 202 mm
2,6 kg
IP 66
6,4 V*
5°
± 0,5 mm/10 m
± 1,0 mm/10 m
400 m
800, 300 rpm
532 nm/3R
0°, 10°, 45°, 90°, 180°
± 5° (± 9 %)
0 °C – +40 °C
219 x 160 x 202 mm
2,6 kg
IP 66
6,4 V*
* with 6,4 V intelligent charger, battery can be charged externally, alkaline batteries can be used alternatively
suppLiEd WitH
Receiver FRG 45-Green, remote
control, rechargeable batteries,
charger, floor mount, magnetic
target, laser glasses, carrying case
art.-No.
242500
2
HoriZoNtaL aNd vErticaL duaL gradE LaSEr
tradEs aNd tasKs
· Excavation: surface/grade
measurement and control
· Prefabricated construction:
alignment, measurement, control
· Ground works: sports fields, car
parks
· Landscape gardening and architecture: garden, paving, paths
· Warehouse construction: piling,
beams, facades
· Building: foundations and concrete
flooring, cutting checks
· Civil engineering: trench/footings
depth control, groundwork and
concrete flooring
FL 500Hv-g
Horizontal and vertical Dual Axis Grade Laser.
a new generation of multi-functional fully automatic self-levelling
dual grade laser designed for exterior and interior applications.
∙ Fully automatic horizontal and vertical self-levelling
∙ Slope functions:
∙ Horizontal:
∙ Digital grade setting of X and Y axis up to ± 10%
∙ Manual slope setting of X and Y axis
∙ Vertical:
∙ Direction of X axis can be set up to ± 10% with Y axis self-levelled
∙ Direction of X and Z axis can be set manually
∙ VWS function (Vibration-Wind-Security);
Rotation will not be stopped due to light ground and wind vibrations
(VWS function is combined with TILT function)
∙ Fully functional 9 Channel 2 way RF remote control
∙ Li-Ion battery technology: 100 % power until fully discharged, no memory effect,
no self-discharge, top-up charging possible
∙ 4-step scanning function
∙ Illuminated display
suppLiEd WitH
Receiver FR 45 with clamp, 2 way
RF remote control, Li-Ion batteries
and charger, vertical mount,
telescopic viewfinder, container
art.-No.
231000
HoriZoNtaL aNd vErticaL duaL gradE LaSEr
2
FEaturEs
· Dual Axis Laser
· Horizontal and vertical
· Digital grade adjustment
· Monitored grade
· TILT function
· VWS function
· 90° beam to zenith
· Illuminated display
· 2 way RF remote control
· Manual function
· 4-step scanning function
· Operation with rechargeable
Li-Ion or alkaline batteries
· Dust/water protection IP 66
FLg 500Hv-g green
Horizontal and vertical Dual Axis Grade Laser. With the option of green beam technology to enhance laser line
visibility in difficult light conditions and long distances.
tEcHNicaL data
FL 500HV-g
Self-levelling range
Accuracy Hz
Accuracy V
Working range with receiver Ø
Laser diode/Laser class
Scanning ranges
Horizontal slope setting
X axis
Y axis
X and Y axis
Vertical slope setting
X axis
Y(Z) axis
Rotating speed
Operating time
Power supply
± 8°
± 0,5 mm/10 m
± 1 mm/10 m
700 m
635 nm/3R
0°, 10°, 45°, 90°, 180°
± 8°
± 0,5 mm/10 m
± 1 mm/10 m
400 m
532 nm/3R
0°, 10°, 45°, 90°, 180°
± 10,000 %
± 10,000 %
∑ ± 14 %
± 10,000%
± 10,000%
∑ ± 14%
± 10,000 %
horizontal self-levelled
300, 600 rpm
40 h
intelligent / Li-Ion
Alkaline batteries (optional)
100 m
9
-10 °C – +45 °C
IP 66
3,85 kg
± 10,000%
horizontal self-levelled
300, 600 rpm
40 h
intelligent / Li-Ion
Alkaline batteries (optional)
100 m
9
0 °C – +40 °C
IP 66
3,85 kg
Remote control range
Remote control channels
Temperature range
Dust/water protection
Weight (instrument only)
FLg 500HV-g grEEN
suppLiEd WitH
Receiver FRG 45-Green with
clamp, 2 way RF remote control,
Li-Ion batteries and charger, vertical
mount, telescopic viewfinder,
container
art.-No.
231500
2
HoriZoNtaL duaL gradE LaSEr
tradEs aNd tasKs
· Excavation: surface/grade
measurement and control
· Ground works: sports fields,
car parks
· Landscape gardening and architecture: garden, paving, paths
· Building: foundations and concrete flooring, cutting checks
· Civil engineering: trench/footings depth control, groundwork and concrete flooring
FEaturEs
·
·
·
·
·
·
·
·
·
·
·
Dual Axis Laser
Steep grade laser
Digital grade adjustment
Monitored grade
TILT function
VWS function
90° beam to zenith
Illuminated display
2 way RF remote control
Manual function
Operation with rechargeable
Li-Ion or alkaline batteries
· Dust/water protection IP 66
suppLiEd WitH
Receiver FR 45 with clamp; 2 way
RF remote control, Li-Ion batteries
and charger, telescopic viewfinder,
steep grade adapter, container
art.-No.
231000
FL 550H-g
A rugged high performance fully automatic self-levelling dual grade
laser. Designed for excavation, ground works and use with machine
control systems for ultimate grade control
the new top of the range dual grade laser can be used
for grades up to 25%
·
·
·
·
·
·
·
·
·
Horizontally fully automatic self-levelling
Digital grade setting of X and Y axis
Steep grade setting in +Y axis up to 25% using steep grade adapter
Manual grade setting of X and Y axis
VWS function (Vibration-Wind-Security);
Rotation will not be stopped due to light ground and wind vibrations
(VWS function is combined with TILT function)
Fully functional 9 Channel 2 way RF remote control
Li-Ion battery technology: 100% power until fully discharged,
no memory effect, no self-discharge, top-up charging possible
Zonal control with electronic beam screen (masking)
Illuminated display
HoriZoNtaL duaL gradE LaSEr
tEcHNicaL data
Self-levelling range
Accuracy horizontal
Accuracy grade
Working range with receiver Ø
Laser diode/Laser class
Slope setting
X axis
Y axis
X and Y axis
Rotating speed
Operating time
Power supply
Remote control range
Remote control channels
Temperature range
Dust/water protection
Weight (instrument only)
± 8°
± 0,5 mm/10 m
± 1 mm/10 m
700 m
635 nm/3R
± 10,000%
-1,000% to +25,000%
∑ ± 20%
600, 1000 rpm
40 h
intelligent / Li-Ion
Alkaline batteries (optional)
100 m
9
-10 °C – +45 °C
IP 66
3,85 kg
2
Positioning Line Laser
tradEs aNd tasKs
FPL L
· I. e. marking of reference lines
for cutting wood, stones, steel,
concrete
FEaturEs
· Projects a clearly visible laser
line
· Power supply 220V with switch
and plug
· Multi-functional mount (rotatable
and swivelling)
Positioning lasers are especially suited for use in m anufacturing industry
and in trade for marking and positioning.
tEcHNicaL data
FpL L-5
FpL L-10
FpL L-20
Visible laser line
Laser wave length
Integrated laser diode
Laser output power
Laser class
Focusing
Fan angle
Temperature range
Dimensions (without mount)
red
635 nm
5 mW
< 1 mW
2M
0 - 10 m focusable
84°
-10 °C – +40 °C
Ø 22.5 x 89 mm
red
635 nm
10 mW
< 5 mW
3R
0 - 10 m focusable
84°
-10 °C – +40 °C
Ø 22.5 x 89 mm
red
635 nm
20 mW
< 5 mW
3R
0 - 10 m focusable
84°
-10 °C – +40 °C
Ø 22.5 x 89 mm
519005
519010
519020
art.-No.
Positioning cross L aser
tradEs aNd tasKs
FPL c
· I. e. marking of reference lines
for cutting wood, stones, steel,
concrete
FEaturEs
· Projects a clearly visible laser
cross
· Power supply 220V with switch
and plug
· Multi-functional mount (rotatable
and swivelling)
tEcHNicaL data
FpL c-5
FpL c-10
FpL c-20
Visible laser cross
Laser wave length
Integrated laser diode
Laser output power
Laser class
Focusing
Fan angle
Termperature range
Dimensions (without mount)
red
635 nm
5 mW
< 1 mW
2M
10 m
120°
-10 °C – +40 °C
Ø 41 x 55 mm
red
635 nm
10 mW
< 5 mW
3R
10 m
120°
-10 °C – +40 °C
Ø 41 x 55 mm
red
635 nm
20 mW
< 5 mW
3R
10 m
120°
-10 °C – +40 °C
Ø 41 x 55 mm
519105
519110
519120
art.-No.
2
PiPE LaSEr
tradEs aNd tasKs
· Civil engineering: Sewer pipes,
drainage
· Ground works: sports fields,
car parks
FkL-50
FEaturEs
·
·
·
·
·
·
Robust aluminium housing
Easy intuitive operation
Fully automatic self-levelling
Automatic beam centring
Laser start point indication
Clear easy to read illuminated
LCD display
· Integrated rechargeable batteries
· Remote control
Self-levelling pipe laser. A rugged waterproof construction
for long lasting performance and reliability in the toughest
conditions.
suppLiEd WitH
Fittings
1 Target frame with target
2 Container
3 Pipe Laser
4 Remote control
5 Leg set DN 500
6 Leg set DN 400
7 Leg set DN 300
8 Leg set DN 200
9 Leg set DN 150
10 Adapter for 3 leg set up
11 Charger
12 Batterie case for alkaline batteries
13 Target DN 400 - 500
FKL-50
tEcHNicaL data
Remote control, NiMH batteries,
charger, battery case for alkaline
batteries, adapter for 3 leg set up,
leg sets DN 150, 200, 300, 400,
500, target, container
Laser class
Laser diode power
Beam diameter
Working range
Grade range
Self-levelling range
Minimum display reading
Horizontal accuracy
Left/right scanning
Operating time
Temperature range
Power supply
Remote control range
front/back
Dust/water protection
Dimensions
Weight (laser only)
Weight set
art.-No.
455000
3R
< 2 mW
12 mm
up to 200 m
-20 % – +40 %
± 5°
0,001 %
± 5 mm/100 m
± 4°
24 h (NiMH)
-20 °C – +50 °C
4 x D 8000 mAh NiMH
(optional 4 x D Alkaline)
60 m/10 m
IP 68
Ø 132 mm, length 380 mm
5 kg
11 kg
PiPE LaSEr
FkL-80/81
2
tradEs aNd tasKs
· Civil engineering: Sewer pipes,
drainage
· Ground works: sports fields,
car parks
FEaturEs
·
·
·
·
·
·
·
·
The FKL-80 emits an automatically levelled or
defined inclined laser beam as reference axis.
It can be set up centrically or at a constant
distance above the pipe invert.
·
·
·
·
suppLiEd WitH
Basic version
1 Target frame with target DN 150 - 300
2 Transport case, with lock
3 Pipe laser with leg set DN 150
7 Leg set DN 300
8 Leg set DN 250
9 Leg set DN 200
12 Battery charger
comfort version (art.-No. 450300)
4 IR remote control
5 Leg set DN 500
6 Leg set DN 400
10 Adapter for mounting with 3 legs
11 Target DN 400 - 500
2
1
3
12
4
11
5
External power supply
Undervoltage cut-out
Watertight
Temperature range
Size/ Weight
Range IR remote control
Dust/water protection
7
8
9
10
FKL 81
tEcHNicaL data
Laser class
Laser
Beam diameter
Working range
Inclination range
Self-levelling range
Reading precision
Permissible deviation
Direction setting range
Banking compensation
Operating time
6
2, < 1 mW /diode
visible red, 635 nm
at laser 13 mm
up to 200 m
-10 % up to +40%
-5 % up to +40 %
0,001 %
± 0,005 %
± 5,000 %
± 4°
rechargeable battery
up to 26 hours
11 to 14 V DC
with cable 0117.00
yes
up to 3,5 m
-10°C up to +50°C
Ø 130 mm, length 265 mm / 3 kg
to 150 m from front to
18 m from behind
IP 67
High power version, max. range
up to 500 m, special feature: laser
power adjustable in five steps, laser
class 3R, laser power < 5mW
art.-No. FKL-80
art.-No. FKL-81
450000
451000
OptiONaL
Comfort package
art.-No.
450300
Fully automatic
Automatic levelling
Banking compensation
Inclination zeroing
Direction centring and cut-out
in case of undervoltage or
jerky movement
Robust metal housing
Special laser beam quality
Brightly illuminated, easily
legible LCD display
Easy handling
Built-in rechargeable battery
Menu
User-friendly infrared remote
control
accESSoriES For rotatiNg aNd LiNE LaSErS
Telescopic rule
Laser EasyFix 5 m
Floor-to-ceiling Pillar kS 3
· Telescopic rule with
incorporated measuring tape
· Every section can be clamped
· Universal adapter for laser
receiver. Receiver can be
fixed with on-level mark on
top of the rule. The height
of the receiver (on-level
mark) can be easily read at
measuring display
· Maximum length 500 cm
· Retracted length 121,5 cm
· Incorporated circular bubble
· Weight 2,7 kg
· Incl. case
art.-No.
· Floor-to-ceiling pillar
(1-leg tripod) to be fixed
between floor and ceiling
· 5 sections
· Maximal length 3,40 m
· 5/8” and 1/4” adapter
· Supplied with carrying bag
· The individual poles are
equipped with 5/8” threads.
This enables them to be
screwed onto tripods, if no
ceiling surface is available.
452
art.-No.
520100
Laser intensive glasses
Magnetic target LS 307
· Laser intensive glasses for
better visibility of laser beam
· Magnetic target, with cm/inch
graduation
art.-No. (glasses red)
art.-No. (glasses green)
art.-No. (target red)
art.-No. (target green)
253000
253001
290500
290501
Wall and ceiling Mount
Screeding Pole
WH 1
· To attach a laser receiver
for checking heights during
concrete laying
· Made of aluminium
· Length of square section
tube 1,5 m
· Diameter of disc 38 cm
· Weight 1,7 kg
art.-No.
4
www.geo-fennel.de
· Robust mount for use on walls
and ceilings
· Ideal for use indoors e.g. setting
out suspended ceilings
· Cm/inch-graduation
· Precise adjustment /alignment
with large slow motion wheel
· Incl. bag
290800
art.-No.
290600
accESSoriES For rotatiNg aNd LiNE LaSErS
adapter 5814
3
Scaffold clamp Holder
· Adapter 5/8“ to 1/4“
· Converts a standard 5/8“ tripod
into a 1/4“ fitting
· For quick centring over
the linchpin
· To connect with rotating laser
levels, automatic levels,
theodolites
· Span approx. 60 mm
· Weight 1,5 kg
art.-No.
art.-No.
290550
grade Mount
320600
adapter for S-digit mini
Adapter for connecting S-Digit mini (see page 74) to the Grade Mount.
Alllows higher accuracy to be achieved.
example of use
· Set slopes between 0 - 90° for
laser levels in manual mode
· Robust construction
· Graduated slow motion screw
· Fits any tripod with 5/8” thread
· With bubble
art.-No.
290700
art.-No.
290750
Wall and ceiling m ount
WH 2
New version with large metal platform suitable for
all geo-FENNEL lasers.
∙ Platform size 150 x 95 mm
∙ Robust mount for use on walls
and ceilings
∙ Ideal for indoor use e.g. setting
out suspended ceilings
∙ Cm / inch graduation
∙ Precise adjustment with large
slow motion wheel
∙ Supplied with carrying bag
∙ Suitable also for other brands
example o f use
art.-No.
290610
5
3
rEcEivErS
receiver for rotating Lasers
Fr 45 und Frg 45-green
With dual display and clamp for levelling staff, shut-off tone, automatic
shut-off, illumination, built-in magnetic strips and vial. Rubberized housing
for effective site protection.
tEcHNicaL data
Fr 45
Frg 45-grEEN
Suitable for laser diode
Indication
3-step accuracy
Power supply
Signal tones
Tone can be switched off
Auto-shut-off
Illumination
Weight
Dust/water protection
red
2 x LCD
± 10 mm, ± 4 mm, ± 2 mm
1x9V
3
yes
yes
yes
0,2 kg
IP 66
green
2 x LCD
± 10 mm, ± 4 mm, ± 2 mm
1x9V
3
yes
yes
yes
0,2 kg
IP 66
art.-No.
252000
252300
receiver for rotating Lasers
Fr 66-MM
With digital level indication in millimetres.
tEcHNicaL data
Indication
5-step accuracy
Measuring units
Power supply
Operating time
Signal tones
Tone can be switched off
Auto-shut-off
Weight
art.-No.
art.-No.
2 x LCD - 3 x LED on front
0,5 / 1 / 2 / 5 / 10 mm
mm, cm, ft, inch
2 x 1,5 V AA Alkaline
60+ h
3 (65, 95, 100 dBA)
yes
yes (30 min., 24 h)
0,54 kg
259000
· Difference between laser plane
and “0” level is shown on the
display in mm
· Segments of display indication
increase / decrease proportionally
· Extremely robust and shock-proof
· Large receiving window (12 cm)
· 5-step accuracy from 0,5 to 10 mm
· Two „0“ positions can be set (automatic recognition through re-set
of receiver clamp)
· HOLD-function – reading on
display can be held
· Dust/water protection IP 67
258000
receiver for Line Lasers
receiver for Line Lasers
Fr 55
Fr 55-M
Height indication by
LEDs and LCD display.
Height indication by LEDs.
6
· Height indication by 3 LEDs
which are situated on the front
side and top plus a large display
on the front
· With clamp
· Shut-off tone
· Automatic shut-off
· Built-in vials
· Height indication by 3 LEDs
which are situated on the front,
side and back
· With clamp
· Shut-off tone
· 2-step accuracy
· Automatic shut-off
· Supplied in case
· Built-in magnet on top
art.-No.
art.-No.
www.geo-fennel.de
500510
500520
rEcEivErS
3
Laser receiver
FMr 600
Heavy duty laser receiver ideal for mounting onto construction machines.
Strong built-in magnets for connection to machines and a clamp for levelling
staffs. Large receiving window (125 mm) and clear height indication (audible
and visible). Ideal for use with smaller excavators.
tEcHNicaL data
Accuracy fine
Accuracy coarse
Working range
Receiving window
Reception angle
Power supply
Operating time
Temperature range
Dimensions
Dust/water protection
Weight
± 5 mm
± 12,5 mm
200 m
125 mm long
240°
4 x AA Alkaline
50 h
-20 °C – +50 °C
170 x 100 x 42 mm
IP 66
0,96 kg
suppLiEd WitH
FEaturEs
Batteries and container
· Attachment to levelling staff by
use of clamp or directly to the
machine with built-in magnets
· LCD, LEDs and 3 different
tones indicate heights
· Memory function of last
received data
· Water resistant
art.-No.
265000
Machine control receiver Set
FMr 700-M und 700-c
A machine control receiver to improve the operating accuracy of your
construction machinery. Used for permanent level control the FMR 700
receiver has a 360° reception range.
tEcHNicaL data
Accuracy fine
Accuracy coarse
Rechargeable batteries
Operating time
Charging time
Temperature range
Dimensions
Weight
± 2 mm – ± 10 mm
± 5 mm – ± 23 mm
7.2 V NiMH
2500 mAh
40 h
15 h
-20 °C – +50 °C
376 x 180 x 49 mm
3,1 kg
art.-No. set FMr 700-M (magnet)
art.-No. FMr 706-M (magnet) w/o remote display
art.-No. set FMr 700-c (clamp)
art.-No. FMr 706-c (clamp) w/o remote display
261000
262000
261100
262100
suppLiEd WitH
FEaturEs
Machine control receiver, built-in
rechargeable battery, charger,
12/24V- battery cable, remote
display with connection cable,
hard case
· Length of receiving
windows 25 cm
· Connect to the machine:
FMR 700-C
– with screw clamps
FMR 700-M
– with strong magnets
· Detects beam from rotating
laser levels of any brand
· Water and dust protected
metal housing to IP 66
· Remote display
Also supplied separately:
- Machine control receiver
FMR 706-M or 706-C, built-in
battery, charger, 12/24V battery
cable, hard case
- Remote display with
connection cable
7
FEaturEs
·
·
·
·
Built-in optical plummet
Telescope bubble
Circle orientation device
Available in 400 gon or 360°
FET 500
Construction theodolite – the versatile starter model
for many applications.
tradEs aNd tasKs
· Ideal for all alignments of
construction elements and
setting out angles
· Prefabricated construction:
walls, measurement, control
· Warehouse construction: piling,
beams, facades
· Building: bricklaying, masonry,
walls, prefabricated and Ferro
concrete construction, steel
and concrete piling
· Civil engineering: setting out
footings, control of profiles
· Road building: incline
tEcHNicaL data
Magnification
Objective aperture
Shortest focussing distance
Direct reading
Estimation
Weight
Temperature range
FEaturEs
·
·
·
·
Clear and easy scale reading
Circle orientation device
Built-in optical plummet
Available in 400 gon or 360°
OptiONaL
20 x
30 mm
1,2 m
0.1 gon / 5‘
10 mgon / 30“
2,0 kg
-40°C – +50°C
Eyepiece prisms for steep angle
sighting and tubular compass
on request
art.-No. 400 gon
art.-No. 360°
350000
350360
art.-No. 400 gon
art.-No. 360°
320000
320100
FEt 200
Engineers‘/Construction theodolite – high accuracy
and clear scale reading. Robust and easy to use.
tradEs aNd tasKs
· Ideal for all alignments of
construction elements and
setting out angles
· Prefabricated construction:
walls, measurement, control
· Warehouse construction: piling,
beams, facades
· Building: bricklaying, masonry,
walls, prefabricated and Ferro
concrete construction, steel
and concrete piling
· Civil engineering: setting out
footings, control of profiles
· Road building: incline
tEcHNicaL data
Magnification
Objective aperture
Shortest focussing distance
Direct reading
Estimation
Weight
Temperature range
30 x
42 mm
2m
10 mgon / 1‘
2 mgon / 10“
3,8 kg
-20°C – +45°C
1
ELEctroNic tHEodoLitES
FEt 405k, FEt 420k
und FEt 110
A range of versatile easy to use electronic theodolites to suit all applications from construction to surveying.
Large illuminated LCD displays for optimum readability – flexible, reliable, affordable. The FET 405K and FET 420K are
equipped with a two-axes compensator.
FET 405K accuracy 5“ – FET 110 accuracy 10“ – FET 420K accuracy 20“
4
tradEs aNd tasKs
· Ideal for setting out alignment
· Prefabricated construction:
walls, measurement, control
· Warehouse construction: piling,
beams, facades
· Building: masonry, walls,
prefabricated and Ferro
concrete construction, steel
and concrete piling
· Civil engineering: setting out
footings, control of profiles
· Road building: grade/slope
FEaturEs
· 2 large easy-to-read LCDs
· Simultaneous reading of
horizontal and vertical circle
· Illumination of display and
field of view
· Clockwise / anti-clockwise horizontal angle reading
· „0“ set or hold of horizontal circle
at any desired position
· „V“ circle reading in gon/degrees
or % of slope
FET 405K and FET 420K
tEcHNicaL data
FEt 420K
FEt 405K
FEt 110
30 x
45 mm
1,4 m
incremental
4 mgon (20“)
2 mgon (10“)
Dual Axis
400 gon / 360° / mil
2 x LCD
30 x
45 mm
1,4 m
incremental
1 mgon (5“)
0,5 mgon (2“)
Dual Axis
400 gon / 360° / mil
2 x LCD
30 x
45 mm
1,3 m
incremental
2 mgon (10“)
1 mgon (5“)
3x
0.5 to ∞
3x
0.5 to ∞
3x
0.5 to ∞
30“/2 mm
8‘/2 mm
NiMH rechargeable battery, charger
15 h
-20°C – +45°C
detachable
4 kg
30“/2 mm
8‘/2 mm
NiMH rechargeable battery, charger
15 h
-20°C – +45°C
detachable
4 kg
30“/2 mm
8‘/2 mm
NiMH rechargeable battery, charger
15 h
-20°C – +50°C
detachable
4,8 kg
art.-No.
314000
315000
311000
Opt. accEssOry: 90° EyEpiEcE
314500
314500
311500
telescope:
Magnification
Clear objective aperture
Shortest focussing distance
angle measurement:
Accuracy
Minimum reading
Compensator
Measuring units
Display
Optical plummet:
Magnification
Focussing range
Vials:
Plate level
Circular level
Power supply
Operating time
Temperature range
Tribrach
Weight
2
FET 110
www.geo-fennel.de
400 gon / 360° / mil
2 x LCD
4
autoMatic LEvELS
tradEs aNd tasKs
For all levelling tasks:
· Building and civil engineering
· Landscape gardening and
architecture
· Interior works
· Project planning
FEaturEs
· Nitrogen filled to prevent
telescope condensation
· Bubble reading prism for
convenient observation of
bubble at eye level
· Optical sight for fast
alignment to target
· Robust metal housing for
protection against damage
· Suitable for both flat and
domed head tripods
automatic Level
Robust and reliable. The No. 10 level series, a market
leading product range for more than 15 years. Continuous development ensures the No. 10 is up-to-date
and suitable for all levelling applications. Suitable for
builders, engineers and surveyors.
No.10
tEcHNicaL data
No. 10-20
No. 10-22
No. 10-26
No. 10-32
Mean error for 1 km
double levelling
Telescope magnification
Objective diameter
Shortest focussing distance
Working range of compensator
Levelling accuracy
Circular bubble
Horizontal circle
Dust/water protection
Weight
2,5 mm
20 x
35 mm
0,5 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,8 kg
2,5 mm
22 x
35 mm
0,5 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,8 kg
2,0 mm
26 x
40 mm
0,5 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,8 kg
1,5 mm
32 x
40 mm
0,5 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,8 kg
art.-No. 400 gon
art.-No. 360°
210007
210008
210001
210002
210003
210004
210005
210006
3
autoMatic LEvELS
4
tradEs aNd tasKs
For all levelling tasks:
· Building and civil engineering
· Landscape gardening and
architecture
· Interior works
· Project planning
FEaturEs
· Metal housing
· Mirror for easy reading
of bubble
· Suitable for both flat and
domed head tripods
automatic Level
Rugged design for site use. Precision optics in a metal
housing and a large range to suit all applications.
FaL
4
Also available as set with
tripod and levelling staff.
tEcHNicaL data
FaL 20
FaL 24
FaL 28
FaL 32
Mean error for 1 km
double levelling
Telescope magnification
Objective diameter
Shortest focussing distance
Working range of compensator
Levelling accuracy
Circular bubble
Horizontal circle
Dust/water protection
Weight
2,5 mm
20 x
38 mm
0,3 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,5 kg
2,0 mm
24 x
38 mm
0,3 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,5 kg
1,5 mm
28 x
38 mm
0,3 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,5 kg
1,0 mm
32 x
38 mm
0,3 m
± 15‘
± 0,5“
8‘/2 mm
400 gon/360°
IP 54
1,5 kg
art.-No. 400 gon
art.-No. 360°
230400
230360
234400
234360
238400
238360
232400
232360
www.geo-fennel.de
EQUIPOS DE MEDICION AMBIENTAL
Sanitary, heating and ventilation, car industry, workshops,
renovation
FvE 100
Video borescope for inspection and survey of inaccessible spaces.
FEaturEs
· Water proof camera head and
probe
· 1m long flexible gooseneck
probe with camera head for
the optical inspection of inaccessible spaces
· Camera head with LED lighting
· Immediate transfer of the
colour image to the large LCD
display
· 180° image rotation at the
press of a button
· Direct transfer of image to
television or notebook
· Accessories:
- Hook and magnet attachments for object retrieval
- Angle mirror attachment to
„view around corners“
- Powerful Li-Ion battery
tEcHNi
caL data
camera
Viewab
head
Focal length
le angle
Viewable distance
Diameter of camera head
Light source
display
Display size
Resolution
Image transmission to LCD
CMOS Image sensor
Video output (to TV)
Various
Probe length
Bend radius of probe
Dust/water protection probe and camera
Power supply
Operating time
Temperature range
Humidity range
Dimensions
Weight with probe
6 - 7 cm
0° and 180°
5 - 15 cm
17 mm
LED
3“
960 x 240 pixel
Flexible gooseneck
300.000 pixel
PAL / NTSC
100 cm
6 cm
IP 67
3,7V / 2000 mAH Li-Ion
4h
-10 °C – + 50 °C
15 – 85 % RH
240 x 160 x 100 mm
0,584 kg
OptiONaL FOr FVE 100 aNd FVE 150
art.-No.
Optional accessories: Gooseneck probes of 1 m and 2 m length
with standard camera head of 17 mm and with 9 mm only.
suppLiEd WitH
Video borescope, 1 m flexible
gooseneck probe, TV cable, USB
cable, charger, magnet, hook
and mirror attachment, container
art.-No.
800700
reference
gooseneck
length
camera head
diameter
P 1-17
P 2-17
P 1-9
P 2-9
1m
2m
1m
2m
17 mm
17 mm
9 mm
9 mm
800750
800751
800752
800753
1
5
ENviroNMENtaL MEaSuriNg EQuiPMENt
FvE 150
tradEs aNd tasKs
tradEs aNd tasKs
Video borescope for inspection and survey of inaccessible spaces. Photos and videos
can be memorized for documentation purposes.
· Sanitary, heating and ventilation, car industry, workshops,
renovation
FEaturEs
· Water proof camera head and
probe
· 1m long flexible gooseneck
probe with camera head for the
optical inspection of inaccessible
spaces
· Camera head with LED lighting
· Immediate transfer of the colour
image to the large LCD display
· 180° image rotation at the press
of a button
· Internal memory or SD-card to
store images and video
sequences
· 2 GB SD-card included (supports
up to 8 GB)
· Date and time indication on the
display
· Transmission of video clips/
images onto television or
PC for editing or documentation
· Multi-language menu (DE, EN,
FR, ES)
· Accessories:
- Hook and magnet attachments
for object retrieval
- Angle mirror attachment to
„view around corners“
- Powerful Li-Ion battery
tEcHNicaL data
camera head
Viewable angle
Focal length
Viewable distance
Diameter of camera head
Light source
display
Display size
Resolution
Image transmission to LCD
CMOS Image sensor
Video output (to TV)
Picture/video formats
Resolution picture/video
Various
Internal memory
Additional memory
0° and 180°
6 - 7 cm
5 - 15 cm
17 mm
LED
3,2“
320 x 240 pixel
Flexible gooseneck
300.000 pixel
PAL / NTSC
JPG / 3 GP
320 x 240 Pixel
70 MB
2 GB SD-card
supports up to 8 GB (optional)
Operation languages
EN, FR, DE, ES
100 cm
Probe length
Bend radius of probe
6 cm
Dust/water protection probe and camera IP 67
Power supply
3,7V / 2000 mAH Li-Ion
Operating time
4h
Temperature range
-10 °C – + 50 °C
Humidity range
15 - 85 % RH
Dimensions
240 x 160 x 100 mm
0,584 kg
Weight with probe
2
www.geo-fennel.de
suppLiEd WitH
Video borescope, 1 m flexible
gooseneck probe, TV cable, USB
cable, charger, magnet, hook and
mirror attachment, 2 GB SD-card,
container
art.-No.
800710
· Heating, ventilation and
refrigeration systems
· Food industry
· Car industry
· Construction
· Building construction
· Fire inspection
· Injection molding industry
· Ship maintenance
· Isolation (heat loss)
· Drying facility
FEaturEs
For non-contact measurement with
laser dot. Quick measurements for:
· surfaces which are difficult to
reach
· moving or rotating objects
· electrified parts
· chemicals
· hot objects
infrared thermometer
Firt 550-Pocket
and Firt 800-Pocket
Small and handy infrared thermometer, easy to operate, for versatile applications. Particular feature:
Measurement with dual laser to focus the target.
suppLiEd WitH
tEcHNicaL data
Firt 550-pOcKEt
Firt 800-pOcKEt
Case, battery
D(istance):S(pot)
Temperature range
Ø measuring spot at 100 cm
Emissivity
Laser pointer
Auto data hold
Illuminated display
Max, Min
High and low alarm
Power supply
Response time
Resolution display
Accuracy
Laser class
Weight
Dimensions
12:1
-50 °C – +550 °C
80 mm
adjustable 0,1 – 1,0
yes, dual
yes
yes
yes
yes
9 V battery
< 1 sec
0,1°C
±1%
2
0,178 kg
146 x 104 x 43 mm
10:1
-35 °C – +800 °C
100 mm
adjustable 0,1 – 1,0
yes, dual
yes
yes
yes
yes
9 V battery
< 1 sec
0,1°C
±1%
2
0,178 kg
160 x 82 x 42 mm
art.-No.
800001
800002
3
5
ENviroNMENtaL MEaSuriNg EQuiPMENt
infrared thermometer
tradEs aNd tasKs
Firt 1000
· Heating, ventilation and
refrigeration systems
· Electrical industry
· Food industry
· Car industry
· Construction
· Building construction
· Fire inspection
· Injection molding industry
· Ship maintenance
· Isolation (heat loss)
· Drying facility
tradEs aNd tasKs
Large temperature range and especially small
measuring target for exact measurements.
FEaturEs
For non-contact temperature
measurements with laser dot
Quick measurements for:
· surfaces which are difficult
to reach
· moving or rotating objects
· electrified parts
· chemicals
· hot objects
4
tEcHNicaL data
Firt 1000
suppLiEd WitH
D(istance):S(pot)
Temperature range
Ø measuring spot at 100 cm
Emissivity
Laser pointer
Auto data hold
Illuminated display
Max, Min, DIF, AVG, Record
High and low alarm
Power supply
Response time
Resolution
Accuracy
Laser class
Weight
Dimensions
50:1
-50 °C – +1000 °C
20 mm
adjustable 0,1 – 1,0
yes
yes
yes
yes
yes
9 V battery
< 1 sec
0,1 °C to 200 °C, 1 °C over 200 °C
± 1,5 %
2
0,3 kg
225 x 115 x 55 mm
Case, battery
art.-No.
800010
www.geo-fennel.de
∙ Temperature measurements of
liquid construction materials like
asphalt, isolation checks
∙ Measurements in the HVAC
branch, energy supply
∙ Industrial and laboratory
application
Professional k-type thermometers
with single and dual input
Ft 1300-1 and Ft 1300-2
FEaturEs
∙ Indication of MAXimum value
∙ Data hold function
∙ Large display (45 mm) with
illumination
suppLiEd WitH
tEcHNicaL data
Ft 1300-1
Ft 1300-2
Flexible wire probe TP-300, set of
batteries, case, user manual
Scanfunction
1 measurement
Sampling rate
Accuracy
Display resolution
Temperature range
Measuring units
Dimensions
Weight
Power supply
2,5x per second
± 0,5% / ± 1°C
0,1° / 1°
-50 °C – +1300 °C
°C / °F / K
162 x 76 x 39 mm
0,21 kg
Batteries
2 measurements
or temperature difference
2,5x per second
± 0,5% / ± 1°C
0,1° / 1°
-50 °C – +1300 °C
°C / °F / K
162 x 76 x 39 mm
0,21 kg
Batteries
art.-No.
800400
800410
tradEs aNd tasKs
digital thermometer
Temperature measurement of
liquids and soft materials.
Ft 1000-Pocket
Handy thermometer with immersion temperature probe.
Pocket-size, light weight and easy to operate.
FEaturEs
· Handy thermometer with
immersion probe
· Pocket-size, light weight, easy to
operate
suppLiEd WitH
tEcHNicaL data
Set of batteries, incorporated
all-purpose probe
Temperature range
Accuracy
HOLD function
Automatic shut-off
Battery status indicator
Dimensions
Weight
Power supply
art.-No.
800420
-20 °C – +1000 °C
±3%
yes
yes
yes
117 x 65x 24 mm
0,16 kg
Batteries
5
5
ENviroNMENtaL MEaSuriNg EQuiPMENt
Humidity and temperature Meter
tradEs aNd tasKs
FHt 60
· Environmental monitoring
· Warehouses, production facilities
· Greenhouses (floristics)
tradEs aNd tasKs
FHt 100
FEaturEs
Quick measurement of relative
humidity and temperature.
FHt 100
Dewpoint temperature measurement for recognition of mold
building up and wet bulb
temperature measurement
(evaporation temperature).
6
tEcHNicaL data
FHt 60
FHt 100
suppLiEd WitH
Temperature range
Humidity range
Fast response time
Illuminated display
Max hold
Data hold
Dewpoint temperature
Wet bulb temperature
Accuracies:
Humidity
Temperature
Dewpoint
Wet bulb
-20°C – +60°C
0 – 100 % RH
yes
yes
yes
yes
no
no
-30°C – +100°C
0 – 100 % RH
yes
yes
yes
yes
-30°C – +100°C
0°C – +80°C
Case, battery
± 3,5 % RH
± 2°C
–
–
± 2 % RH
± 0,5°C
± 0,5°C
± 0,5°C
art.-No.
800100
800110
www.geo-fennel.de
· Building and construction: Plaster,
gypsum, concrete and mortar
· Wood construction: Sawn timber
· General: Firewood, wood, cardboard, paper
Moisture Meter
FHM 10
Pocket-size moisture meter for fast and convenient measurement of
moisture content.
FEaturEs
· Measurement principle: electrical
resistance
· Dual display for wood and
construction materials
· Replaceable 8mm measuring pins
· Protective cap with integrated
function check and battery check
· Automatic power-off
· Impact resistant housing
tEcHNicaL data
Measuring range wood
Accuracy wood
Measuring range other materials
Accuracy wood
Power supply
Dimensions
Weight
suppLiEd WitH
9 V alkaline battery
art.-No.
800450
6 – 44 %
± 1 %*
0,2 – 2 %
± 0,05 %
3 x CR2032 batteries
130 x 40 x 25 mm
102 g
*Average adjustment for European wood based on wood temperature of 20°C
Moisture Meter
590
tradEs aNd tasKs
CE mark approved
Conforms to the EU standards EN50081-1 (97) and EN50082-1 (97)
· Civil engineering (plaster)
· Wood processing
· Diagnose moisture related
problems
The moisture meter 590 determines the humidity content of a material
according to the resistance procedure: the two measuring pins are pressed
into the material and electrical current is conducted through it. With increasing water content, resistance reduces and the conductivity of the material
increases. If the material has a high resistance, the humidity content is low,
if the material has a low resistance, the humidity content is high.
FEaturEs
· Digital reading of humidity in %
· Additional indication of humidity
in 3 steps through LEDs:
LO (low)
MI (medium)
HI (high)
· Battery indicator
· Automatic power shut off
The moisture meter measures the humidity permeation of the material or
surface humidity and also determines the dry and humid areas.
This measuring device is used for determining moisture levels in timber and
soft building materials such as gypsum or plaster.
tEcHNicaL data
Range
suppLiEd WitH
Carrying case, 2 replacement
electrode pins, battery
art.-No.
800300
Accuracy
Temperature range
Sizes
Weight
8 % – 28 %; beyond 28 % values are
indicated in direction
± 2 % between 8% and 28 %
0°C – +40°C
193 mm x 44 mm x 40 mm
150 g with batteries (1,5 V / 4 x AAA)
7
5
ENviroNMENtaL MEaSuriNg EQuiPMENt
Moisture detector
tradEs aNd tasKs
FFM 100
tradEs aNd tasKs
· Building materials
· Concrete floors, walls, ceilings
Quick non-destructive measurement of surface
humidity up to 40 mm measuring depth.
FEaturEs
Quick measurement of humidity
in building materials without
destruction of the surface.
· Indication of minimum/
maximum values
· Sensor type metal spheroid
tEcHNicaL data
Measuring depth
Measuring range
Resolution
HOLD function
Display illumination
Automatic shut-off
Battery status indication
Dimensions
Weight
Power supply
20 – 40 mm
0 – 100
1
yes
yes
yes
yes
80 x 45 x 45 mm
0,18 kg
Batteries
suppLiEd WitH
Set of batteries, case
art.-No.
800650
thermometer - anemometer
tradEs aNd tasKs
Fta 1
· Ventilation and air conditioning:
Installation of ventilation systems,
measurements of air flow and
temperature
· Agriculture: Crop spraying, ventilation surveys and crop storage
· Environmental monitoring
A professional remote vane thermo-anemometer for
measuring air velocity, air flow and temperature.
FEaturEs
tEcHNicaL data
air velocity
m/s
ft/min
km/h
mph
knots
Measuring range
0,40 – 30,00
80 – 5900
1,4 – 108,0
0,9 – 67,0
0,8 – 58,0
resolution
0,01
1
0,1
0,1
0,1
accuracy
± 3 % ± 0,20 m/s
± 3 % ± 40 ft/min
± 3 % ± 0,8 km/h
± 3 % ± 0,4 mph
± 3 % ± 0,4 knots
air flow
CMM (m³/min)
CFM (ft³/min)
Measuring range
0 – 999900
0 – 999900
resolution
0,001
0,001
accuracy
0 – 999,9 m²
0 – 999,9 ft²
air temperature
°C
°F
Measuring range
-10° – +60 °C
14° – 140 °F
resolution
0,1 °C
0,1 °F
accuracy
± 2 °C
± 4 °F
· Simultaneous display of air flow
and air velocity
· Measurement of ambient
temperature
· Large easy-to-read LCD display
with switchable backlight
· Maximum/minimum function
· 20 average readings for air flow
and air velocity
· Data HOLD function
· 16 memory locations for area
(8 CMM, 8 CFM)
· Remote vane with low-friction
bearing (65 mm dia.) for
accurate results
suppLiEd WitH
Various
Power supply
Operating time
Dimensions
Weight
8
www.geo-fennel.de
1 x 9 V alkaline battery
80 h
75 x 203 x 50 mm
280 g
Sensor with 120 cm cable,
9 V alkaline battery, container
art.-No.
800700
Sound Level Meter
· Industry, health & safety,
school, public works
· Environmental measurements
FEaturEs
FSM 130
and FSM 130+
· For quick check of sound level
· Standard IEC 651 type 2
suppLiEd WitH
Case, battery
tEcHNicaL data
FsM 130
FsM 130+
Low range (Lo)
High range (Hi)
Frequency weighting A, C
35 – 100 dB
65 – 130 dB
Max hold
Data hold
Analog AC/DC output
or connection to analyzer
or recorder
IEC 651 Type 2 standard
Built-in calibration check
Accuracy at 94 dB
Operation temperature
Operation humidity
yes
yes
yes
35 – 100 dB
65 – 130 dB
Lo 35-100 dB
Hi 65-130 dB
yes
yes
yes
yes
no
1,5 dB
0°C – +40°C
< 80 % RH
yes
yes
1,5 dB
0°C – +40°C
< 80 % RH
art.-No.
800200
800210
tradEs aNd tasKs
5-in1 digital Multimeter
∙ Universal measuring device for ∙
DC and AC voltage
∙ DC current resistance
∙ Transistor hFE diode and
continuity test
∙ Light (luminosity)
∙ Sound
∙ Humidity
∙ Temperature overload protection
FMM 5
tEcHNicaL data
suppLiEd WitH
All-purpose probe TP-500, set of
batteries, case, testing cable
art.-No.
800600
Multimeter
Max. range
resolution
accuracy
Voltage DC
Voltage AC
Current DC
Resistance
600 V
600 V
10 A
20 MΩ
0,1 mV
100 mV
0,1 μA
0,1 Ω
± 0,5 % ± 2*
± 1,2 % ± 10*
± 1,0 % ± 2*
± 0,8 % ± 2*
Environment
Max. range
resolution
accuracy
Light (luminosity)
Sound
Humidity
Temperature
20.000 Lux
100 dB
95 % RH
-20 °C – +200 °C
-20 °C – +1300 °C
0,1 Lux
0,1 dB
0,1 % RH
0,1 °C
0,1 °C
± 0,5 % ± 10*
± 3,5 dB
± 5,0 % RH
± 3,0 % ± 1*
± 3,0 % ± 5*
* digital
9
5
ENviroNMENtaL MEaSuriNg EQuiPMENt
tP-300
tP-500
Flexible wire probe.
All-purpose probe.
tradEs aNd tasKs
∙
∙
∙
∙
K-type element
Ø 2,5 mm
Length 100 cm
Measurement temperature range
-50°C – +300°C
∙ Application with FT 1300-1,
FT 1300-2, FMM5
art.-No.
800900
K-type element
Ø 3 mm
Length of probe 12 cm
Length of wire 76 cm
Temperature measurement of
air or liquids (i.e. oils, water, sand,
building materials)
∙ Measurement temperature range
-50°C – +900°C
∙ Application with FT 1300-1,
FT 1300-2, FMM5
art.-No.
800901
Nr-88B
Nr-31B
Flexible steel probe.
Surface temperature probe.
∙
∙
∙
∙
K-type element
Ø 2 mm
Length 100 cm
Measurement temperature range
-50°C – +450°C
∙ Application with FT 1300-1,
FT 1300-2, FMM5
art.-No.
10
∙
∙
∙
∙
∙
800902
∙
∙
∙
∙
K-type element
Length of probe 12 cm
Length of wire 150 cm
Measurement temperature range
-50°C – +450°C
∙ Temperature measurement of
surfaces on hard materials
∙ Application with FT 1300-1,
FT 1300-2, FMM5
art.-No.
Nr-33
Nr-38
Right angle surface temperature probe.
Air temperature probe.
800903
∙ K-type element
∙ Temperature measurement of
surfaces which are difficult to
reach or which are hot with no
need to keep the hand over
heated area
∙ Length of probe 34 cm
∙ Length of wire 150 cm
∙ Measurement temperature range
-50°C – +450°C
∙ Temperature measurement of
surfaces on hard materials
∙ Application with FT 1300-1,
FT 1300-2, FMM5
∙ Quick measurement of air and
gas temperature
∙ Length of probe 21 cm
∙ Length of wire 150 cm
∙ Measurement temperature range
-50°C – +800°C
∙ Application with FT 1300-1,
FT 1300-2, FMM5
art.-No.
art.-No.
800904
www.geo-fennel.de
800905
6
LaSEr diStaNcE MEtErS
FEaturEs
·
·
·
·
Plus/minus
Area/volume
Permanent measurement
Indirect height measurement
(Pythagoras)
· Reference front/back
· mm, ft, inch
Ecodist
The perfect starter model with professional features. Compact and ergonomically designed. Shortcut keys for area and volume calculation, permanent function for stake-out and indirect height measurement (Pythagoras
function). The EcoDist Plus offers complex technology at an affordable price
with long-term reliability. The ideal laser distance meter for professionals or
inexperienced users. A tool box is not complete without the EcoDist!
tEcHNicaL data
suppLiEd WitH
Holster, batteries
art.-No.
d1750
FEaturEs
·
·
·
·
·
·
·
·
·
Plus/minus
Area/volume
Permanent measurement
Indirect height measurement
(Pythagoras)
Reference front/back
mm, ft, inch
Flip-out end-piece
Minimum/maximum
Stores last measurements
Distance
Accuracy
Dust/water protection
Weight
0,10 – 30 m
± 2 mm
IP 40
96 g
diSto d2
The compact and handy base model was specifically designed for indoor
applications. Shortcut keys for addition, subtraction, aera and volume calculation make measuring fast and very reliable. The last 10 measurements
are also stored. As with all Leica laser distance meters, the laser dot is
clearly visible. You can always see the targeting point, even if the target
object is in a hard to access aera. Leica DISTO™ D2 – you will never use a
measuring tape again!
tEcHNicaL data
suppLiEd WitH
Holster, batteries
art.-No.
300001
Distance
Accuracy
Dust/water protection
Weight
0,05 – 60 m
± 1,5 mm
IP 54
90 g
diSto dXt
FEaturEs
·
·
·
·
·
·
·
·
·
Plus / Minus
Area / Volume
Minimum / Maximum
Permanent measurement
mm, ft, inch
Reference front / back
Flip-out endpiece
Room function summary
Height measurement
(Pythagoras)
· Dust/water protection IP 65
The robust and stable laser distance meter for everyday use at rough
construction sites. The Leica DISTO™ DXT is dust tight and jet water protected as per IP 65. A massive rubber coating protects the sensitve optic.
The Leica DISTO™ DXT even passes drop tests from 2 m height without
being damaged. The extra sealed keypad can be easily cleaned under flowing water. The Leica DISTO™ DXT calculates areas, volumes or room values
without any problem. Thanks to the integrated Pythagoras function heights
and widths can be measured indirectly when direct measuring is not possible. The instrument also offers minimum / maximum function, automatic
detection of the multifunctional endpiece and storage for up to 10 values.
tEcHNicaL data
suppLiEd WitH
Holster, hand loop, batteries
art.-No.
300020
Distance
Accuracy
Dust/water protection
Weight
0,05 – 70 m
± 1,5 mm
IP 65
130 g
1
LaSEr diStaNcE MEtErS
diSto d3a and d3a Bt
With the Leica DISTO™ D3a you can measure distances easily and precisely even if there is an obstruction. Thanks to the combination of distance
and tilt measurements horizontal distances can be determined easily and
precisely. If you accomplish a measurement with a tilt of ± 45° the Leica
DISTO™ D3a will automatically calculate the shortest. At the touch of a button, distance and tilt are measured simultaneously. Additional results such
as height etc. are displayed. Furthermore, the Leica DISTO™ D3a calculates
areas of rectangles or triangles or volumes, makes room calculations and
has different kinds of Pythagoras functions integrated.
The DISTO™ D3a BT has integrated BLUETOOTH ® technology and transfers all measured values wireless, quick and error-free to PC. Your data can
be easily further processed in Excel ®, Word ®, AutoCad ® or other applications. The file transfer software „Leica DISTO™ transfer“ is included in
the scope of delivery.
6
FEaturEs
· Plus / Minus
· Area / Volume
· Minimum / Maximum
· Permanent measurement
· mm, ft, inch
· Reference front / back
· Flip-out endpiece
· Room function summary
· Height measurement
(Pythagoras)
· Measurement despite obstructions
· Angle measurement up to 45°
· BLUETOOTH (D3a BT only)
suppLiEd WitH
Holster, hand loop, batteries
art.-No. d3a
art.-No. d3a Bt
tEcHNicaL data
Distance
Accuracy
Dust/water protection
Weight
0,05 – 100 m
± 1,0 mm
IP 54
150 g
diSto d5
The Leica DISTO™ D5 convinces with lucid colour display and shows crystal-clear image when targeting with the digital pointfinder. The 4 x zoom
makes finding the target at long distances much easier and allows measurements to be taken even in glaring sunshine. With the built-in tilt sensor
you can also take indirect measurements and measure past obstructions
(horizontal distance).
300015
300016
FEaturEs
· Maximum / minimum
· Permanent measurement
· Plus / minus
· Area / volume
· Room function summary
· Indirect height measurement
(Pythagoras)
· Measurements despite
obstructions
· Measurement of facade areas
· Measurements of vertical angles
up to ± 45°
tEcHNicaL data
Distance
Accuracy
Dust/water protection
Weight
0,05 – 200 m
± 1,0 mm
IP 54
195 g
suppLiEd WitH
Holster, hand loop, batteries
art.-No.
300006
FEaturEs
diSto d8
The Leica DISTO™ D8 is equipped with Bluethooth® technology incl. software for wireless and easy transfer to PCs: With the high resolution colour
display and the digital pointfinder with 4 x zoom you can measure long range
distances quickly and easily because you always see your targeted point.
The combination of angle and distance measurements allows you to determine distances where conventional methods fail. The horizontal distance,
for example, can also be determined quickly and efficiently past obstacles
or the elevation of a tree, even though there is no reflective point.
· Maximum / minimum
· Permanent measurement
· Plus / minus
· Area / volume
· Room function summary
· Indirect height measurement
(Pythagoras)
· Measurements despite
obstructions
· Measurement of facade areas
· Indirect slope measurements
· Bluetooth™
· 360° tilt sensor for measurement
of any slope (even overhead)
tEcHNicaL data
Distance
Accuracy
Dust/water protection
Weight
2
www.geo-fennel.de
0,05 – 200 m
± 1,0 mm
IP 54
205 g
suppLiEd WitH
Holster, hand loop, batteries
art.-No.
300008
6
ELEctroNic SLoPE MEaSurErS
FEaturEs
· Small and handy
· Inclination in degrees (°) or
percent (%)
· Working range of angle
measurement 4 x 90°
· 0° and 90°-position of inclination
is confirmed by a signal tone
· Automatic digit inversion for
overhead measurements
· Hold-function to freeze
measurement
· Magnetic base
· 1/4” thread for camera tripod
· Zero position re-set (between
0° and 33°)
S-digit mini
Electronic inclinometer. Handy-size and accurate. This ensures easy
measurement even in the most difficult situations.
tEcHNicaL data
Working range
Resolution
Accuracy
Power supply
Operating time
Size
Weight
Temperature range
FEaturEs
· Working range 4 x 90°
· Different signal tones when
approaching 0° / 90° and
continuous tone at 0° and 90°
· Zero position re-set (between
0° and 33°)
· Inclination in degrees (°) and
percent (%)
· Magnetic housing
· Visible laser beam to extend
working range
· HOLD-function to freeze
measurement
· Illuminated display
· ¼” thread for camera tripod
suppLiEd WitH
4 x 90°
0,1° or 0,1%
0° + 90° = ± 0,1°
1° - 89° = ± 0,2°
3 x 1,5 V AAA Alkaline
600 h
156 x 56 x 31 mm
0,3 kg incl. batteries
-10° – +45° C
Padded bag, batteries
art.-No.
610000
S-digit multi
Electronic inclinometer with a rotatable display for easy reading in many positions.
tEcHNicaL data
Resolution
Accuracy
Power supply
Operating time
Weight (with batteries)
Length
Temperature range
Laser class
suppLiEd WitH
0,1° or 0,1%
0° and 90° = ± 0,1°
1° to 89° = ± 0,2°
3 x AAA Alkaline
w/o laser 50 h
with laser 20 h
0,5 kg
27 cm
-10° – +45° C
2
Padded bag, batteries
art.-No.
630000
3
ELEctroNic SLoPE MEaSurErS
S-digit 60
FEaturEs
· Length 60 cm
· Inclination in degrees (°) or
percent (%)
· Working range of
measurement 4 x 90°
· 0° and 90°-position of
inclination is confirmed by a
signal tone
· Automatic digit inversion for
overhead measurements
· Visible laser beam to extend
working range
· Hold-function to freeze
measurement
· Built-in horizontal, vertical
and 45°-vials
· 1/4“ thread for camera tripod
· Zero position re-set (between
0° and 33°)
Robust slope measurer. Length 60 cm. Incorporated laser beam.
tEcHNicaL data
Working range
Resolution
Accuracy
Working range laser
Accuracy
Wave length
Laser class
Power supply
Operating time
Weight
Dimensions
Temperature range
suppLiEd WitH
4 x 90°
0,1° / 0,1 %
0° + 90° = ± 0,1°
1° - 89° = ± 0,2°
20 m
± 0,5 mm /1 m
650 nm
2
3 x 1,5 V AA Alkaline
60 h
0,85 kg
600 x 27 x 60 mm
-10° – +45° C
Padded bag, batteries
art.-No.
620000
S-digit 60WL und 120WL
Electronic inclinometers for everyday use.
FEaturEs
∙
∙
∙
∙
∙
∙
∙
∙
4
180° rotatable display
Inclination direction indication
Working range 4 x 90°
Different signal tones when
approaching to 0° and 90°
Continuous tone at 0° and 90°
2 built-in 90° vials, 1 horizontal vial
Recessed handgrip for ergonomic
use
Integrated hooks
tEcHNicaL data
s-digit 60WL
s-digit 120WL
suppLiEd WitH
Length
Measuring units
HOLD function
Accuracy 0° + 90°
Accuracy 1° – 89°
Power supply
Operating time
Weight
Dimensions
Temperature range
60 cm
°, %, mm, m, in, ft
ja
± 0,1°
± 0,2°
3 x AAA Alkaline
60 h
0,68 kg
600 x 61 x 28 mm
-10° – +45° C
120 cm
°, %, mm, m, in, ft
ja
± 0,1°
± 0,2°
3 x AAA Alkaline
60 h
1,1 kg
1200 x 61 x 28 mm
-10° – +45° C
Set of batteries, case
art.-No.
640000
www.geo-fennel.de
6
640100
6
ELEctroNic SLoPE MEaSurErS
FEaturEs
· Displays angle and inclination
simultaneously
· Angle measurement in degrees
· Inclination in degrees (°) or
percent (%)
· Automatic digit inversion for
overhead measurements
· Working range of angle
measurement 0 to 180°
· Automatic shut-off
· Hold-function to freeze
measurement
· 180°-lock to prolong the unit
to 1m length
· Arm can be locked in every
desired position
· Visible laser beam to extend
working range
· 1/4“ thread for camera tripod
· Zero position re-set (between
0° and 33°)
Multi-digit Pro
All-in-one. Electronic angle measurer, electronic slope measurer and laser
spirit level. Easy and accurate. For measuring angles, inclinations, sloped
and plane surfaces.
tEcHNicaL data
Working range angle
Resolution
Accuracy angle
Working range inclination
Resolution
Accuracy inclination
Range of laser
Accuracy laser
Wave length
Laser class
Temperature range
Power supply/ Operating time
Length (unfolded)
Weight
suppLiEd WitH
0° – 180°
0,1°
± 0,1°
0° – 90° or 0 % – 100 %
0,1° or 0,1%
0,2°
20 m
± 0,5 mm /1 m
650 nm
2
-10 °C – +45 °C
3 x 1.2 V AA batteries / 48 h
530 mm (1.000 mm)
1,3 kg incl. batteries
Padded bag, batteries
art.-No.
600000
angle Finder
· Easy measurement of angles
from 0° to 180° in 1° increment.
· Horizontal and vertical vials.
· With clamping screw.
· Built-in ends for use as compass
for scribing.
· Length: 40 cm
art.-No.
M381005
5
digitaL PLaN MEaSurErS
Scale Master Pro XE
tradEs aNd tasKs
Measures and calculates
lengths and rectangular areas
Professional digital plan measurer. 91 architectural, engineering, map and
metric blueprint scales. Perform instant linear, rectangular area and volume
take-offs. Reads your measurement in feet/inches or metric. Subtract,
constant and counter.
suppLiEd WitH
OptiONaL
Scale Master Pro XE with case,
batteries and manual
PC-kit for data transfer to PC
art.-No.
art.-No.
6135
6
·
·
·
·
Pipe construction
Heating, air conditioning
Fence construction
Telecommunication and
cable companies
· Electrical fitters
· Architects
5001B
tradEs aNd tasKs
ultra Scale Master Pro
Measures and calculates length,
rectangular areas and all kind of
polygons
Take full advantage of your Ultra Scale Master® Pro digitizing capabilities
by using Smart Takeoff!™ – an optional affordable and simple-to-use graphic
digitizing program. When combined with the speed and accuracy of the
Ultra Scale Master® Pro digitizing tool, this system is invaluable as part of
any construction cost estimating system.
· Pipe construction
· Plumbers
· Plumbing, heating, air
conditioning
· Fence construction
· Telecommunication and cable
companies
· Electrical fitters
· Engineering
· Landscape gardening and
architectures
· Concrete construction
· Floor laying
· Building contractors
· Roofers
· Tile layers
· Interior decorators
· Architects
Smart Takeoff!™ provides graphic representation of the digitized coordinates for the Ultra Scale Master® Pro, and verifies quantities while minimizing, or even eliminating, errors of omission and miscalculation. Use Smart
Takeoff!™ to determine quantities of area, perimeter, length, and vertical
surface area for compiling construction cost estimates.
Smart Takeoff!™ transfers digitized quantities to virtually any Windows®
based program including spreadsheets (spreadsheet program not included), and also allows you to export the graphic image in DXF format for use
in other programs. The Ultra Scale Master® Pro can also operate as a stand
alone digital area takeoff tool, or you can connect it to your PC to transfer
measurements into any estimating and spreadsheet program that accept
text input from a number pad or keyboard.
6
The ergonomic design with large targeting window alows you to accurately
measure and compute areas, segment lengths, perimeters, and volumes for
simple or complex polygons, polylines, irregular shapes, arcs and circles.
72 built-in architectural and engineering scales allow you to measure plans
and drawing up to 24“ x 35“ in size. Four custom scales allow you to measure out of scale drawings.
art.-No. (separate)
ultra scale Master pro
smart takeoff!-software
6250
6230
Further information is available @ www.geo-fennel.de
art.-No. (set)
ultra scale Master proset
6271
www.geo-fennel.de
7
aLL- PurPoSE triPodS
aLL-PurPoSE triPodS
Aluminium and wooden tripods for measuring instruments.
Strong, durable and reliable.
aluminium tripods
FS 20, FS 23
FS 20-d, FS 23-d
aluminium tripod Fs 20
Similar to FS 23. Lighter
construction. Ideal for levelling
instruments.
aluminium tripod Fs 20-d
Same as FS 20 tripod, however,
with domed head
aluminium tripod Fs 23-d
Same as FS 23 tripod, however,
with domed head.
aluminium tripod Fs 23
· Ideal for all measuring
instruments
· Quick clamp system
· Flat head
· Shoulder carrying strap
· Diameter of tripod head 158 mm
FS 23 W/S with screw clamp
Wooden tripods
aluminium tripods
FS 24
FS 40
· Robust wooden tripod for
theodolites and total stations
· Quick clamp system
· Flat head
· Shoulder carrying strap
· FS 24 W/S with screw clamp
articLE
tripOd HEad
FS 20
FS 20-D
FS 23
FS 23-D
FS 23 W/S
FS 24
FS 24 W/S
FS 40
Flat head
Domed head
Flat head
Domed head
Flat head
Flat head
Flat head
Column/ Flat head
· Adjustable range of centre
column 30 cm
· Operating range 0,95 – 1,86 m
(incl. 30 cm centre column)
· Quick clamp system
siZE/cM
105 – 165
105 – 165
105 – 170
105 – 170
105 – 170
105 – 170
105 – 170
95 – 186
WEigHt
3,5 kg
3,5 kg
5,1 kg
5,1 kg
5,1 kg
6,5 kg
6,5 kg
3,2 kg
art.-No.
151
157
152
153
152 W/S
154
154 W/S
150
Elevating tripod
camera tripod
FS 10
FS 14
· Lightweight elevating tripod
made of aluminium for
instruments with 5/8” thread
· Working range 67 to 188 cm
(incl. 30 cm centre column)
· Rotating head
· Incorporated circular bubble
· Weight 2,3 kg
· Incl. bag
· Lightweight elevating tripod
made of aluminium for
instruments with 1/4“ thread
· Working range 57 to 161 cm
· Rotating head
· Ideal as accessory for
laser distancemeter
· Incl. bag
· Weight 1,4 kg
art.-No.
art.-No.
302000
301000
1
ELEvatiNg triPodS
ELEvatiNg
triPodS
Elevating tripod
FS 30-M
Elevating tripods with adjustable range –
ideal for all rotating and line lasers.
· Working range 0,80 – 2,00 m
· Adjustable range of centre
column 39 cm
· Quick clamp system, shoulder
carrying strap
· Robust chains between
tripod legs
· Integrated retractable rubber
pads for non-slip use on
hard surfaces
· Continuous opening for
instruments with plumb down
facility
· Incorporated circular bubble
Elevating tripod
FS 30-XS
· Working range 1,01 – 3,00 m
· Adjustable range of centre
column 36 cm
· Fine crank drive for fine adjustment of working range
· Upper column length 43 cm
· Quick clamp system, shoulder
carrying strap
· Struts between tripod legs
· Integrated retractable rubber pads
for non-slip use on hard surfaces
· Retracted length 1,1 m for convenient transport
· Incorporated circular bubble
Elevating tripod
FS 30-L
· Working range 0,95 – 2,85 m
· Adjustable range of centre
column 40 cm
· Quick clamp system, shoulder
carrying strap
· Robust chains between
tripod legs
· Integrated retractable rubber
pads for non-slip use on
hard surfaces
· Incorporated circular bubble
· Continuous opening for
instruments with plumb down
facility
Elevating tripod
FS 30-S
Elevating tripod
· Short tripod ideal for cutting
checks
· Working range 0,68 – 1,38 m
· Adjustable range of centre
column 35 cm
· Quick clamp system, shoulder
carrying strap
· Robust chains between
tripod legs
· Integrated retractable rubber
pads for non-slip use on
hard surfaces
· Continuous opening for
instruments with plumb down
facility
· Incorporated circular bubble
FS 30-XL
· Working range 1,66 – 3,80 m
· Adjustable range of centre
column 104 cm
· Load up to 20,0 kg
· Combined quick and screw
clamp system for extra stability
· Struts between tripod legs
· Retracted length 1,79 m only for
comfortable transport
· Made of aluminium (centre
column) and fibre glass (tripod)
· Incorporated circular bubble
Integrated circular bubble
2
articLE
tripOd HEad
FS 30-S
FS 30-XS
FS 30-M
FS 30-L
FS 30-XL
Column/ Flat head
Column/ Flat head
Column/ Flat head
Column/ Flat head
Column/ Flat head
www.geo-fennel.de
siZE/ cM
68 – 138
101 – 300
80 – 200
95 – 285
166 – 380
WEigHt
4,2 kg
5,7 kg
5,2 kg
8,2 kg
15,6 kg
art.-No.
155
165
158
156
159
7
7
tELEScoPic LEvELLiNg StaFFS
rod Level
Lr 7
· For TN 14/15 and TN 15-0
· Adjustable
art.-No.
370
telescopic Levelling Staff
telescopic rule
tN 20k
EasyFix 5 m
· Made of strong aluminium
tubes
· Graduation in mm
· Length 2,40 m
· Lower part adjustable in height
for zero setting
· Including circular bubble and
carrying case
· Including adjustable clamp for
receiver
· Weight 0,9 kg
· Ideal for use with rotating
laser levels
· Correct sign reading
art.-No.
482
· Easy reading of measuring display
· Auto-lock on each section
when fully extended
· Incorporates two vials
· Cm/mm-graduation on
bottom section
· Retracted length 104 cm,
max. length 5 m
· Weight 2 kg
suppLiEd WitH
Threaded pins for top and bottom
plate for measuring to corners and
edges, carrying case
art.-No.
451
telescopic Levelling Staff
telescopic Levelling Staff
tN 14/15
tN 15-0
· Made of strong
aluminium tubes
· Silver anodised finish
· Front side cm-E graduation
throughout total length
· Available in 4 m and 5 m
· Reverse side graduation in mm
for height measurements
· Slit to fix LR 7 rod level
· Fully adjustable
· Secure snap-in at each meter
Same as TN 15, however, reverse
side graduation in mm with “0”
beginning at the bottom.
Available in 5 m only
OptiONaL
OptiONaL
Nylon case with shoulder carrying
strap, rod level LR 7
art.-No. tN 14, 4 m
art.-No. tN 15, 5 m
484
485
Nylon case with shoulder carrying
strap, rod level LR 7
art.-No.
486
3
MEaSuriNg WHEELS aNd MarkiNg SPray
Precision Measuring Wheel
M 10
· Wheel circumference 1 m
· Clamp for wheel
· Robust support allows M 10
to stand upright
· Dirt remover
· Precision counter with „0“ reset
· Sturdy spokes offer low resistance
to wind ensuring ease of use
· The highly visible colour of the
wheel aids operator safety during
use on roads
· Weight 2,7 kg
art.-No.
Marking Spray
110
Precision Measuring Wheel
M 10S
· Enviromentally neutral:
free of CFC, toluene, heavy metal
· Contents 500 ml
· All angle spraying
· Marking and sticking to any surface
even if it is wet
· Fast drying
· Complete emptying of can
· Colour coordinated cap which is
connected with the can
cOLOurs
Same as M 10, however:
· Heavy model with doubledisk wheel made of metal
· Weight 3,4 kg
art.-No.
141
· Bright orange
· Warning red
· Radiant blue
· Gleaming yellow
· Safety green
· Pink
· Red
· Yellow
· White
art.-No.
901
902
903
904
905
906
911
913
915
Electronic Measuring Wheel
ME 100 with kickstand
M 10k and M 10t
·
·
·
·
Wheel circumference 1m
Accuracy 0,1%
Range from 0 to 999.999,99 m
Memory function
Sturdy PVC-case and padded nylon
bag for M 10, M 10S or M 20
art.-No.
4
6425
www.geo-fennel.de
art.-No. case
art.-No. bag
011
010
7
7
tWo-Way radio
FEaturEs
∙
∙
∙
∙
Clear audio quality
Long range
Robust housing, IP-X6
European wide license toll free
(PMR 446)
∙ LED shows receipt, transmission
and battery status
F 6
Two-way radio for professional use.
F 6-HM hand microphone
F 6-EM earphone / clip microphone
suppLiEd WitH
OptiONaL
tEcHNicaL data
Two-way radio, rechargeable
battery, charger, belt clip, hand
loop, user manual
F 6-HM hand microphone with
jacket clip
RF output power
Frequency range
Channels
Audio output
Battery
Charging time
Working time (per charge)
Weight
Dimensions
Temperature range
Working ranges, outside, open terrain
Working ranges, outside, built-up area
art.-No.
870100
OptiONaL
F 6-EM earphone / clip microphone
art.-No.
870000
art.-No.
870150
500 mW
446.0062 – 446.0937 Mhz
16 (15+S)
500 mW
7,2 V Li-Ion, 1100 mAh
6
h
24 h
225 g
54 x 99 x 31 mm
-20 °C – +60 °C
5 km
3 km
5
raNgiNg PoLE
Metal ranging Pole
ranging Pole tripod
rP 2
rPt 1
· Each pole consists of 2 sections
of 1 m length screwed together
to make one pole of 2 m
· Universal 5/8” fitting
· White/red sections
· Metal tip
· Supplied as a set of 6 poles
in a carrying bag
art.-No.
800
Extension
1m
· Extendable tripod legs
77 - 128 cm, with secure clamps
· Weight 1,25 kg
· Clamp with adjustable
ball-and-socket joint
· Supplied with carrying case
· 1m section for extending the
ranging pole as required
· White/red colour
· 5/8” thread
art.-No.
810
Multi-detector 3-in-1
· The ideal tool for detecting
and locating
- Metals
- Electric wires AC
- Wooden beams in walls, floors
and ceilings
· Object located by blue LED
and an acoustic signal
· Two sensitivity modes
· Automatic calibration
art.-No.
6
M721001
www.geo-fennel.de
art.-No.
820
7
7
EdM accESSoriES
Prism Poles
Bipod
L 23, L 25, L 36, L 50
B 18
for GPS Rods and Prism Poles.
tEcHNicaL data
L 23
L 25
L 36
L 50
Length
Adapter
134 - 250 cm
5/8‘“
150 - 360 cm
5/8“
160 - 500 cm
5/8“
Adapter height adjustable
Clamp type
Circular bubble
Case
Weight
122 - 208 cm
5/8“, Leica pin, optical square
(Ø 10mm)
no
Quick release clamp
yes
yes
0,9 kg
yes
Quick clamp
yes
yes
1,5 kg
no
Quick clamp
yes
yes
1,9 kg
no
Quick clamp
yes
yes
2,35 kg
· Made of aluminium
· Working range of legs
1,10 m to 1,80 m
· Quick release clamping
mechanism for legs
· Possible rod diameters 19 to 38 mm
· Staffs and poles secured
with thumb screw
· Weight 2 kg
· Supplied with: leg clip and
nylon case
art.-No.
223
225
227
228
art.-No.
640
gPS antenna Poles
g 20, g 25
coMBiNatioN oPtioNS
A2
AL 11D
AJ10
A4
tEcHNicaL data
g 20
g 25
Length
Adapter
Material lower tube
Material upper tube
Connection
Clamp type
Circular bubble
Case
Weight
Remark
200 cm
5/8“
Carbon fibre
Carbon fibre
Fixed
yes
yes
0,6 kg
lightweight
136 - 248 cm
5/8“
Carbon fibre
Aluminium
Telescopic
Screw clamp
yes
yes
1,1 kg
Steel locking pin can
be inserted at 1,80,
2,00, 2,20 m to
guarantee no slipping
art.-No.
630
L 25
L 36
L 50
L23
HD Mini
ALL 103
CRT 10
A3
AJ 10D
635
7
EdM accESSoriES
Prismset a2
Mini Prism Pin Pole Set
adS 103
· Tilting prism holder made of
plastic, yellow/black target
made of metal. Including bag.
· Single prism Ø 62,5 mm
· Accuracy ± 2“
· Offset 0/-30 mm
· Axis height 100 mm
· The pin pole has 3 sections that
screw together to form a height
of 0,6, 1,2 or 1,8 m.
· The adjustable 25 mm prism can
be locked anywhere along its
length.
· 0 mm offset
art.-No.
art.-No.
401600
Prismset a3 (Leica style)
· Tilting prism holder made of
plastic, yellow/black target
made of metal. Including bag.
· Single prism Ø 62,5 mm
· Accuracy ± 2“
· Offset -34 mm
· Axis height 84 mm
art.-No.
401700
403100
tribrachs
· AJ 10 without optical plummet
· Available in black and green
art.-No. black
art.-No. green
400103
400101
· AJ 10-D with optical plummet
· Available in black and green
Prismset a4
· Tilting prism holder made of
metal, yellow/black target
made of metal. Including bag.
· Single prism Ø 62,5 mm
· Accuracy ± 2“
· Offset 0/-30 mm
· Axis height 97 mm
art.-No.
401800
Mini Prism Set Hdmini
· With circular levelling vial,
padded bag, 5/8” female base,
hook for plumb bob
· Single prism Ø 25 mm
· Accuracy ± 2“
· Offset 0/-30 mm
· Axis height 70 mm
art.-No.
403000
Mini Prism Set gF105
·
·
·
·
·
Ø 25 mm
Accuracy ± 2“
Double yoke
0/-30 mm offset
Can be mounted from top
or bottom
· 2 circular bubbles
· Padded bag
art.-No.
8
art.-No. black
art.-No. green
art.-No.
400303
tribrach adapter
· AL11-D
· With optical plummet, height
adjustable, tubular bubble
· Available in black
art.-No.
400203
· CRT 10
· With Leica adapter
· Available in green and black
·
·
·
·
·
www.geo-fennel.de
400003
400001
· DJ 100 with laser plummet
· Available in black
art.-No. black
art.-No. green
403200
7
400250
400251
ALL 103
Leica adapter
Optical plummet
Tubular bubble
Available in green
art.-No.
400205
7
accESSoriES
optical Squares
rod Levels
LR 1
LR 34
F1, F2, J2, F10, c1, F8
LR 39
LR 5
F 1/F10
J2
C1
For holding, fixing or suspending to ranging poles and levelling rods
Type
Housing
Accuracy
LR 39 Plastic
LR 39 Metal
LR 34 + LR1 Metal
LR 5 Wood
F1
F2
J2
F10
C1
F8
Metal or plastic
Metal or plastic
Plastic
Metal or plastic
Metal
Plastic
> 1‘
> 1‘
> 2‘
> 2‘
> 3‘
> 1‘
articLE
Lr 39, plastic
Lr 39, metall
Lr 1, metal, adjustable
Lr 34, metal, adjustable
Lr 5, wood
not adjustable
not adjustable
adjustable
adjustable
art.-No.
390
391
310
330
350
Surveyors’ Folding Frames
F8
articLE
Optical square F 1
Optical square F 1 with metal housing
Optical square F 2
Optical square F 2 with metal housing
Optical square J 2
Optical square F 10
Optical square F 10 with metal housing
Optical square F 8 without case
Optical square c 1 with case
Zip case FE 1a
press stud case FE 1B
range pole adapter L1
art.-No.
210
211
220
222
242
250
251
280
230
012
013
277
Surveyors’ Folding rules
Including carrying strap
DIN A4 plastic (red)
DIN A4 plexiglass (transparent)
DIN A4 wood
DIN A3 plastic
DIN A3 wood
articLE
diN a4, wood
diN a4, plastic (red)
diN a4, plexiglas (transparent)
diN a3, wood (w/o picture)
diN a3, plastic (w/o picture)
Made from the finest quality wood, with strong joint springs.
Front side: Levelling graduations (E reading) 1 m black, 1 m red
Reverse side: mm graduation in black
Available in 2 m and 3 m lengths
art.-No.
541
542
543
531
532
articLE
surveyors’ folding rule, 3 m, erect
surveyors’ folding rule, 2 m, erect
t1 surveyors’ field bag
art.-No.
410
412
601
9