Download User`s Manual

Doremi V1 MP2 Video Server
23
4. Doremi V1 MP2 Video Server
Fastrack hybrid editors control the Doremi V1 MP2 server as source and record devices
simultaneously, load and trim Clips directly on the editor, and play them back-to-back on a
single channel.
This driver was developed using a DOREMI V1 MP2 with 4.42z system and 1.16 front panel
firmware, and a R2/P2 configuration.
4.1. Connection
1
For simultaneous PB and RECORD capability on the Doremi, connect RS-422 9-pin
D connector machine control cables from available ports (P1-P24) on the Fastrack
RS-422 panels to the RS422-1 and RS422-2 connectors on the rear of the Doremi
chassis.
2
Feed the same sync source to the Doremi as to the Fastrack.
4.2. Configuring the Doremi V1 MP2
Menu
Menu 1 / Control / Remote
Menu 2 / Time Mode / A Time
Menu 4 / Chase Mode / Off
Option Menu
Option Menu 1 / TRANSPORT / DiskAcc / PL-RE
Option Menu 1 / TRANSPORT / FrameMod / Off
Option Menu 1 / TRANSPORT / StopMod / Still for PB channel, EE for Record
channel
Option Menu 1 / TRANSPORT / FastMod / Normal
Option Menu 1 / TRANSPORT / PL1Field<% / 0
Option Menu 1 / TRANSPORT / Emulate / VDCP
Option Menu 1 / TRANSPORT / Record at: / Cur P.
4.3. Configuring the Fastrack
1
In the Assignment Page ([SHIFT][ASGN]) of the Fastrack, assign the following for
the PLAY Track. Note that the Player Device Name must contain the channel
number as part of the name (Track 1 in the example below).