Download 7.3 Configuration Tool

Transcript
destination and source are the same, the two IP address will also be the
same. Please note the destination and source are using the same port.
12) DDNS Setting
DDNS function is not supported in the ETHERNET MODUL.
7.3.2 Serial Configuration.
The serial settings used by BULLION are shown on the Fig.18. These
settings should not be changed. If you have command Factory these
settings must be reentered again manually.
Fig.18: Default serial settings of BULLION
☞ By clicking the “Setting” button, changed value can be applied.
- 15 -