Download 7.3 Configuration Tool

Fig.5.1: Default mode of the 4-position switch
1 position ON - only the data from aircrafts with position is decoded and
processed
2 position ON – add a time stamp to the RAW data massages
3 position ON (4 position OFF) - the receiver works in IP mode and sends
data through Ethernet
4 position ON (3 position OFF) – the receiver works in USB mode (no
data via Ethernet). With USB cable connected to the 4 pin connector
(shown on schematics in Chapter 10) the receiver works just as
microADSB-USB receiver. In this mode the firmware of the receiver can
be updated.
PC/Hub/Switch
Standart
Eternet
Cable
8v DC
max100m
Injector
Fig.6: Connecting the microADS-IP BULLION receiver
-6-