Download Manual - Trixology

CWOP_no_password_error=510
CWOP_no_response=710
Currently not in use (reserved for future use)
Couldn't find a CWOP server (server down or DNS error).
Temporary fatal.
CWOP_error_no_reply=711
Server found but did not reply. WeatherCat will try again.
CWOP_error_latlong=720
Latitude/Longitude not set in the preferences - can't send. The
CWOP driver will stop.
CWOP_internet_down=800
WeatherCat was not able to open a TCP/IP socket. WeatherCat
will retry shortly.
CWOP_server_busy=801
The CWOP server refused WeatherCat's connection request;
WeatherCat will try another server.
The CWOP state can change rapidly. Normally when working, the state will be switching
between CWOP_transmitting (logging into the server), CWOP_serverX (where X is 1 through 5)
(logged into server X - see WeatherCat's advanced CWOP preferences for the server
addresses), CWOP_good_response (packet sent with no errors) and CWOP_OK (all done, last
packet transmitted OK, idle waiting for next transmission).
Normal running state can be determined by examining the CWOPState and if it's between
200 and 399, all is good.
Many CWOP error states are spurious in nature; WeatherCat will try to correct the problem
either by selecting another server, waiting for a small period of time and trying again or
restarting its CWOP driver.
Page !190